Hi Etienne,
It depends on who is the owner of the fiber.

The incumbent carrier typically has enough fiber strands to avoid any colored 
interfaces (that are 3x expensive compare to gray) in the Metro.
Metro ring typically has 8-10 nodes (or similar). 16-20 strands of fiber were 
not possible to construct anyway – any cable is bigger.
It is the same cost to lay down fiber on 16 strands or 32.
Hence, PTT just does not need DWDM in Metro, not at all. Hence, the DWDM 
optimization that you are talking about below is not needed too.

If you rent a single pair of fiber then you need colored interfaces to 
multiplex 8-10 nodes into 1 pair on the ring.
Then the movement of transponders from DWDM into the router would eliminate 2 
gray interfaces on every node (4 per link): one on the router side, and another 
on the DWDM side.
Overall, it is about a 25% cost cut of the whole “router+DWDM”.
It is still 2x more expensive compare to using additional fiber strands on YOUR 
fiber.

By the way, about “well-defined stack of technologies”:
NMS (polished by SDN our days) should be cross-layer: it should manage at the 
same time: ROADM/OADM in DWDM and colored laser in Router.
It is a vendor lock up to now (no multi-vendor). Hence, 25% cost savings would 
go to the vendor that has such NMS, not to the carrier.
Technology still does not make sense because no multivendor support between the 
NMS of one vendor and the router or DWDM of another.
Looking at the NMS history, it would probably never be multi-vendor. For that 
reason, I am pessimistic about the future of the colored interfaces in routers 
(and alien lambdas in DWDM). Despite a potential 25% cost advantage in 
eliminating gray interfaces.

PS: "routed optical networks" is proprietary marketing. Nobody understands what 
you mean. I did google to understand.

Eduard
From: NANOG [mailto:nanog-bounces+vasilenko.eduard=huawei....@nanog.org] On 
Behalf Of Etienne-Victor Depasquale via NANOG
Sent: Monday, May 1, 2023 9:29 PM
To: NANOG <nanog@nanog.org<mailto:nanog@nanog.org>>
Subject: Routed optical networks

Hello folks,

Simple question: does "routed optical networks" have a clear meaning in the 
metro area context, or not?

Put differently: does it call to mind a well-defined stack of technologies in 
the control and data planes of metro-area networks?

I'm asking because I'm having some thoughts about the clarity of this term, in 
the process of carrying out a qualitative survey of the results of the 
metro-area networks survey.

Cheers,

Etienne

--
Ing. Etienne-Victor Depasquale
Assistant Lecturer
Department of Communications & Computer Engineering
Faculty of Information & Communication Technology
University of Malta
Web. https://www.um.edu.mt/profile/etiennedepasquale

Reply via email to