Thank you guys, This will be useful, but I still have some questions: Where can I see comparations between the routers? Also, where can I find datasheets containing FIB, RIB and BGP routes limits for cisco and Juniper? It is quite dificult!
Thanks again! 2009/7/17 Larry Stites <nc...@sbcglobal.net> > Livio, > > Tough economic conditions and heightened environmental awareness have many > ISPs, Telcos and NOCs considering Green IT as viable option when purchasing > network hardware. As licensed resellers of previously owned network > equipment we stock and supply Juniper and Cisco routers, switches and > associated modules. > > For example: > > (1) JUNIPER M10iBASE > (2) RE-850-1536 > (2) FEB-M10I-M7I > (2) HCM-M10I-M7I > (4) PWR-M10I-M7I-AC can be switched to DC > > New, back up surplus, unused condition - $15,500 > Original box, packing, Junos and accessories > > (1) JUNIPER M10iBASE > (1) RE-850-1536 > (2) FEB-M10I-M7I > (2) HCM-M10I-M7I > (4) PWR-M10I-M7I-AC can be switched to DC > > New, back up surplus, unused condition- $11250/EA > Original box, packing, Junos and accessories > (2) bundles available in this config and condition > > (1) JUNIPER M10iBASE > (1) RE-850-1536 > (1) FEB-M10I-M7I > (2) HCM-M10I-M7I > (4) PWR-M10I-M7I-DC > > Refurbished condition- $9K > Respectfully used, very good condition > Power cords, Junos and rack kit included. > > (6) PE-1GE-SX-B $1450/each > > Also available: > > (4) Juniper M5BASE-2AC-E each configured as: > ( 4 PIC Slot Chassis: (1) Built-in Enhanced FPC, Cooling, Midplane, > Forwarding Engine Board (with Internet Processor II, ASIC, 8MB SSRAM, > Routing Engine 2.0 (333Mhz - 768Mb), (2) AC Power Supply, $3500.each > > Subject to prior sale > Warranty minimum 90 days > References available > > > -- > > Best regards, > > > Larry E. Stites > Northern California Networks, Inc. > United Network Equipment Dealers Association > CA LIC#2004 SR KH 100-484111 > Nevada City, CA 95959 > cell 530 320 4194 > land 530 265 2588 > nc...@sbcglobal.net > www.uneda.com > -- > > > on 7/16/09 1:40 PM, Livio Zanol Puppim wrote: > > > Hello guys, > > > > I need to buy 2 border routers to handle 2 155Mbps links using BGP full > > route with each ISP. What may I analyse at the routers hardware? > > > > I'm asking for: > > 1Giga Byte of RAM expansible to 1,5GB > > 1.000.000 FIB capacity in hardware (since 512K won't be enought soon) > > 1.000.000 RIB capacity. > > > > What do you recommend to ask for? Are these specifications ok? Do I need > > more RAM or less FIB? > > Is there any site I can use to see specifications for border routers? > Anyone > > knows of any PoC involving routers? > > > > > > -- []'s LĂvio Zanol Puppim