Hello Michael: > -----Original Message----- > From: Michael Ruiz [mailto:mr...@telwestservices.com] > Sent: Tuesday, November 24, 2009 8:02 AM > To: nanog@nanog.org > Subject: <Help --> Having trouble trying to activate a GigE connection> > > Group, > > > > I am having an issue with activating a Gige interface > between a Cisco 7206 VXR w/IO-1GE module to a 7606 w/sup720-3bxls > connecting to a line module WS-X6416-GBIC. I have verified that the > GBIC-MMF have good light reading and the MMF fiber jumper are not > reversed. The GigE connection comes up briefly for about a few > seconds, > takes a burst of errors and goes down. I have tried to set the speed > to > nonegotiate on both ends, set one end to speed auto. No dice. Here is > the copy of the configuration. On my 7606 I show that the GigE > interface is up/up but on the 7206vxr I show down/down. Any help will > be greatly appreciated. Thanks! > > > I don't think there is any reason to have hard-set speed and duplex, particularly between two Cisco's. Why not just set *both* sides (you can't set just one) to auto-negotation - 'no speed nonegotiate' on the 7606 side. Is this a straight shot, single fiber pair between the two or are there intermediate junctions or optics? It sounds like you have questionable fiber or optics in the path. It could be the fiber itself or the GBICs on either side.
Regards, Mike
