On 06/25/2011 07:49 AM, Jay Ashworth wrote: > ----- Original Message ----- >> From: "Jussi Peltola" <pe...@pelzi.net> > >> On Fri, Jun 24, 2011 at 06:29:14PM -0400, Jay Ashworth wrote: >>> This is gonna be fun, no? >> >> If your definition of fun is spending a year watching an old microwave >> clock lose or gain a few minutes. >> >> I don't see how this has anything to do with syncing two generators. >> The grid is in sync, and if the frequency of the grid changes (as it does >> all the time) it will stay in sync. It has nothing to do with the >> absolute frequency. > > Perhaps I read the piece incorrectly, but it certainly sounded to *me* like > the part that was hard was not hitting 60.00, but *staying in sync with > others*... > > Cheers, > -- jra
Generators all stay in sync. Generator owners have expensive devices that sync the phase before the generator is connected to the grid. Once a generator is connected to the gird, it will stay in sync - in fact that is why they have the expensive devices to make sure that they are in sync before they connect them, as if they are not, it will instantly jump to being in sync, which may destroy the generator. I'm not an electrical engineer, but I do IT "Cybersecurity" for a local utility. The electrical engineering / power utility side of the house starts to rub off - but I say this as I might not have all the terms exactly right. I follow the FERC/NERC discussions as CIP compliance is one of my primary job duties. In fact, if you want to see what happens if you connect a generator out of phase, just look into the AURORA out-of-phase circuit breaker re-closing issues which were brought to light last year. Here's some links: http://www.atcllc.com/oasis/Customer_Notices/ATCNetworkCustomerMeeting052411_Francis.pdf Here's another link I read in the last week when trying to get up to speak more: http://yarchive.net/car/rv/generator_synchronization.html Jason Roysdon
