On 11/19/11 8:11 AM, Righa Shake wrote: > Hi, > > Am having a problem that is buffling. > > I recently changed a POS link encapsulation from PPP to Frame-relay. > Since that time the POS interface keeps resetting from time to time. > > On my BGP session am receiving cease notifications from my upstream > provider. > > The setup is such that we have a cisco on one end and a Juniper on the > other. > > interface POS0/0/0 > mtu 4474
Does this match the other end? > no ip address > no ip unreachables > encapsulation frame-relay You might try "encapsulation frame-relay ietf" for full compatibility with non-Cisco gear at the other end. > logging event link-status > crc 32 > pos scramble-atm > frame-relay lmi-type ansi > end > > ROUTERshow run int pos0/0/0.101 > Building configuration... [snippage] > ! > interface POS0/0/0.101 point-to-point > LMI enq sent 81981, LMI stat recvd 77480, LMI upd recvd 0, DTE LMI up ^^^^^ ^^^^^ Something is dropping frames. [snippage] > Last clearing of "show interface" counters 1w2d [snippage] > 6970870 runts, 2179 giants, 0 throttles > 0 parity > 892493293 input errors, 882184781 CRC, 0 frame, 0 overrun, 0 ignored, > 3335463 abort Lots of CRC line errors, runts, giants, LMI dropped frames. Kind of looks like you could have a physical problem with the link itself. -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV