Johnathan is correct about not using perl for this. There are some iptables modules, but they're all out of date or incomplete (I mention this because if you get around to making them work decent, I'll love you for it). Otherwise, perl -> IPC::Run -> ipt isn't going to gain you anything. And I'd be amazed if you could even keep up with a gbit.
Per signature detection, see Bro. Though, it seems the ipt state module might fit the bill just fine. And you could log that and then have an ETL that scraped your log file and created a new ACL based on that (so that hardware could do the majority of the work). I'm sure an ipt -> acl isn't a new idea and you can probably find something that handles most edge cases. On Jun 13, 2013 7:12 PM, "Phil Fagan" <philfa...@gmail.com> wrote: > Yeah, I only thought of perl cause I'm used to running through 'while true' > loops and someone showed me Perl was about 400x faster....good thing I'm > not running through 10gb/s worth of data :-D > > Figured getting closer to hardware was the way to go.....I'll have to check > out PF_RING. > > > > > On Thu, Jun 13, 2013 at 4:49 PM, Jonathan Lassoff <j...@thejof.com> wrote: > > > On Thu, Jun 13, 2013 at 3:38 PM, Phil Fagan <philfa...@gmail.com> wrote: > > > I would assume something FreeBSD based might be best.... > > > > Meh... personal choice. I prefer Linux, mostly because I know it best > > and most network application development is taking place there. > > > > > On Thu, Jun 13, 2013 at 4:37 PM, Phil Fagan <philfa...@gmail.com> > wrote: > > >> > > >> I really like the idea of a stripe of linux boxes doing the heavy > > lifting. > > >> Any suggestions on platforms, card types, and chip types that might be > > >> better purposed at processing this type of data? > > > > Personally, I'd use modern-ish Intel Ethernet NICs. They seem to have > > the best support in the kernel. > > > > >> I assume you could write some fast Perl to ingest and manage the > tables? > > >> What would the package of choice be for something like this? > > > > Heh... "fast" Perl. > > As for programming the processing, I would do as much as possible in > > the kernel, as passing packets off to userland really slows everything > > down. > > If you really need to, I'd do something with Go and/or C these days. > > > > Using iptables and the "string" module to match patterns, you can chew > > through packets pretty efficiently. This comes with the caveat that > > this can only match against strings contained within a single packet; > > this doesn't do L4 stream reconstruction. > > > > You can do some incredibly-parallel stuff with ntop's PF_RING code, if > > you blow more traffic through a single core than it can chew through. > > > > It all depends on what you're trying to do. > > > > --j > > >> > > >> > > >> On Thu, Jun 13, 2013 at 3:11 PM, Jonathan Lassoff <j...@thejof.com> > > wrote: > > >>> > > >>> Are you trying to block flows from becoming established, knowing what > > >>> you're looking for ahead of time, or are you looking to examine a > > >>> stream of flow establishments, and will snipe off some flows once > > >>> you've determined that they should be blocked? > > >>> > > >>> If you know a 5-tuple (src/dst IP, IP protocol, src/dst L4 ports) you > > >>> want to block ahead of time, just place an ACL. It depends on the > > >>> platform, but those that implement them in hardware can filter a lot > > >>> of traffic very quickly. > > >>> However, they're not a great tool when you want to dynamically > > >>> reconfigure the rules. > > >>> > > >>> For high-touch inspection, I'd recommend a stripe of Linux boxes, > with > > >>> traffic being ECMP-balanced across all of them, sitting in-line on > the > > >>> traffic path. It adds a tiny bit of latency, but can scale up to > > >>> process large traffic paths and apply complex inspections on the > > >>> traffic. > > >>> > > >>> Cheers, > > >>> jof > > >>> > > >>> On Thu, Jun 13, 2013 at 12:32 PM, Eric Wustrow <ew...@umich.edu> > > wrote: > > >>> > Hi all, > > >>> > > > >>> > I'm looking for a way to block individual TCP flows (5-tuple) on a > > 1-10 > > >>> > gbps > > >>> > link, with new blocked flows being dropped within a millisecond or > so > > >>> > of > > >>> > being > > >>> > added. I've been looking into using OpenFlow on an HP Procurve, > but I > > >>> > don't > > >>> > know much in this area, so I'm looking for better alternatives. > > >>> > > > >>> > Ideally, such a device would add minimal latency (many/expandable > CAM > > >>> > entries?), can handle many programatically added flows (hundreds > per > > >>> > second), > > >>> > and would be deployable in a production network (fails in bypass > > mode). > > >>> > Are > > >>> > there any > > >>> > COTS devices I should be looking at? Or is the market for this all > > >>> > under > > >>> > the table to > > >>> > pro-censorship governments? > > >>> > > > >>> > Thanks, > > >>> > > > >>> > -Eric > > >>> > > >> > > >> > > >> > > >> -- > > >> Phil Fagan > > >> Denver, CO > > >> 970-480-7618 > > > > > > > > > > > > > > > -- > > > Phil Fagan > > > Denver, CO > > > 970-480-7618 > > > > > > -- > Phil Fagan > Denver, CO > 970-480-7618 >