Ever since first using it I've always liked tacacs+. Having said that
I've grown to dislike some things about it recently. I guess, there
have always been problems but I've been willing to leave them alone.
I don't have time to give the code a real deep inspection, so I'm
interested in others thoughts about it. I suspect people have just left
it alone because it works. Also I apologize if this is too verbose or
technical, or not technical enough, or just hard to read.
History:
TACACS+ was proposed as a standard to the IETF. They never adopted it
and let the standards draft expire in 1998. Since then there have been
no official changes to the code. Much has happened between now and
then. I specifically was interested in parsing tac_plus logs
correctly. After finding idiosyncrasies I decided to look at the source
and the RFC to see what was really happening.
Logging, or why I got into this mess:
In the accounting log, fields are sometimes logged in different order.
It appears the client is logging whatever it receives without parsing it
or modifying it. That means the remote system is sending them in
different orders, so technically the fault lies with them. However, it
seems too trusting to take in data and log it without looking at it.
This can also cause issues when you send a command like (Cisco) "dir
/all nvram:" on a box with many files. The device expands the command to
include everything on the nvram (important because you might want to
deny access to that command based on something it expanded), but it gets
truncated somewhere (not sure if it's the device buffer that is full,
tac_plus, or the logging part. I might tcpdump for a while to see if I
can figure out what it looks like on the wire) I'm not sure if there are
security implications there.
Encryption:
The existing security consists of md5 XOR <content> with the md5 being
composed of a running series of 16 byte hashes, taking the previous hash
as part of the seed of the next hash. A sequence number is used so
simple replay shouldn't be a factor. Depending on how vulnerable
iterative md5 is to it, and how much time you had to sniff the traffic,
I would think this would be highly vulnerable to chosen plaintext if you
already have a user-level login, or at least partial known plaintext
(with the assumption they make backups, you can guess that at least some
of the packets will have "show running-config" and other common
commands). They also don't pad the encrypted string so you can guess
the command (or password) based on the length of the encrypted data.
For a better description of the encryption you can read the draft:
http://tools.ietf.org/html/draft-grant-tacacs-02
I found an article from May, 2000 which shows that the encryption scheme
chosen was insufficient even then.
http://www.openwall.com/articles/TACACS+-Protocol-Security
For new crypto I would advise multiple cipher support with negotiation
so you know what each client and server is capable of. If the client and
server supported multiple keys (with a keyid) it would be easier to
roll keys frequently, or if it isn't too much overhead they could use
public key.
Clients:
As for clients, Wikipedia lists several that seem to be based on the
original open-source tac_plus from Cisco. shrubbery.net has the
"official" version that debian and freebsd use. I looked at some of the
others and they all seemed to derive from Cisco's code directly or
shrubbery.net code, but they retained the name and started doing their
own versioning. All the webpages look like they're from 1995. In some
cases I think it's intentional but in some ways it shows a lack of care
for the code, like it's been dropped since 2000.
Documentation is old:
This only applies to shrubbery.net's version. I didn't look at the
other ones that closely. While all of it appears valid, one Q&A in the
FAQ was about IOS 10.3/11.0. Performance questions use the sparc 2 as
a target machine. There isn't an INSTALL or README, just the
FAQ/CHANGES/COPYING (and a tac_plus.conf manpage), so the learning curve
for new users is probably pretty steep. Also there isn't a clear
maintainer. The best email address I found was listed in the
tacacs+.spec file, for packaging on rpm systems.
If you hit the website they give some hints with some outdated, though
still functional links. And they list the official email as
tac_p...@shrubbery.net
Conclusion:
Did everyone already know this but me? If so have you moved to
Kerberos? Can Kerberos do everything TACACS+ was doing for router
authorization? I've got gear that only supports radius and tacacsplus,
so in some cases I have no choice but to use one of those, neither of
which I would trust over an unencrypted wire. If TACACS+ isn't a dead
end then it needs a push to bring the protocol to a new version. There
are big name vendors involved in making supported clients and servers.
There should be someone invested in keeping it secure and adding features.