If it were me I would pickup a SupIII or SupIV off ebay. They are pretty cheap.
Justin --- Justin Wilson <j...@mtin.net> MTIN Consulting Mikrotik UBNT Climbing Network Design http://www.mtin.net/ <http://www.mtin.net> http://www.thebrotherswisp.com -----Original Message----- From: Jay Ashworth <j...@baylink.com> Date: Friday, December 13, 2013 at 3:59 PM To: NANOG <nanog@nanog.org> Subject: Re: Catalyst IOS refresher site? >----- Original Message ----- >> From: "Jeremy Bresley" <b...@brezworks.com> > >> Might help if you said what type of line cards and sup you've got. A >> SupII era card is CatOS, SupIII and newer are IOS, command sets are >> completely different, and depending on the line cards you've got, you >> might have some of the really old L2 only cards (can't remember if you >> could do L3 on the bastard Gig/FE cards only, or if it was dependent >> on the particular Sup installed). That said, if it's an IOS Sup, I'd >> start here: >> >>http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_command_refer >>ence_list.html > >Hmm. I wasn't smart enough to shoot a pic of the front panel, and I'm >not picking it up til Monday, so I don't know. I have some background >in Catalyst IOS, but it's old and on 3500-class switches, not the >bigger iron. > >Thanks, >-- jra >-- >Make Election Day a federal holiday: http://wh.gov/lBm94 100k sigs by >12/14 > >Jay R. Ashworth Baylink >j...@baylink.com >Designer The Things I Think RFC >2100 >Ashworth & Associates http://baylink.pitas.com 2000 Land >Rover DII >St Petersburg FL USA #natog +1 727 647 >1274 >