With respect to vendor neutral training I would suggest starting with CWNP @ www.cwnp.com.
They specialize in providing vendor-neutral Wi-Fi training and certification. Instructor led training is available via certified training partners. In addition, there are study guides available for purchase. CWTS (lvl 0) - Intro - terms & lingo CWNA (lvl 1) - Wi-Fi 101 CWSP (lvl 2) - Wi-Fi Security CWDP (lvl 2) - Wi-Fi Design CWAP (lvl2) - Wi-Fi Protocol Analysis CWNE (lvl3).... I recommend completing some or all the CWNP training to understand how Wi-Fi works. Once you understand how Wi-Fi works, you'll know how to design and configure a network to meet your design goals. Next, complement your vendor neutral training with applicable vendor specific training to understand their interface and specific nuances. Moving to another vendor is just a matter of learning where the nerd knobs are for configuring their product as you'll already know the fundamentals of Wi-Fi. Kindest regards, Troy -- *Troy Martin* | M 403.966.4370 On Tue, Jun 2, 2015 at 2:18 AM, George Tasioulis <george.tasiou...@gmail.com > wrote: > On Mon, Jun 1, 2015 at 8:23 PM, Hugo Slabbert <h...@slabnet.com> wrote: > > > Doubt how much PoE you'd use for the MetroWifi stuff, but for the > > "small/medium events Wifi coverage": > > > > Ubiquiti Networks. > >>> > >>> Its cheap and it works great. Support sucks though. > >>> > >> > > Just watch it here if you're expecting to plug UniFi APs into standard > > 802.3af/at ports and get power. When I last interacted with them > (customer > > equipment; year or two old, I believe) a lot of their WAPs are 24V, not > > 802.3af/at. > > > Only their UniFi AP & AP-LR are 24V, all the rest of their product line > (AP-PRO, AP-AC as well as the outdoor units) are 802.3af or 802.3at > compliant. > You can easily overcome this limitation by using their 8-port ToughSwitch > were each POE port can be configured to either 24V or 48V. > IMHO Ubiquity's UniFi is a very decent solution when you want to keep > budget low. > > - G. >