I was pretty much thinking the same, get a switched/metered outlet PDU. APC, ServerTech, et al have them, then daisy chain something like a Dell AP6015 off the outlet. No clue about NEC/local laws, but the Dells are pretty much setup for that type of setup.
> On Jun 5, 2015, at 5:20 PM, Brian Loveland <br...@bloveland.com> wrote: > > APC does make some 'half rack' PDU's that take a C20 inlet so they could > hang off a C19 outlet on another PDU: > http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP8858&displayList=ALL&page_type=displaybasic&printer_friendly=yes > http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP7821&displayList=ALL&page_type=displaybasic&printer_friendly=yes > > On the software side, just use a "master" PDU with metering. These "sub" > ones are also metered but you would want to look at the total utilization > on the "master". > > No comment if its to code... > > On Fri, Jun 5, 2015 at 12:51 AM, shawn wilson <ag4ve...@gmail.com> wrote: > >> Well, I was kinda thinking this would turn out to be a dumb question / have >> an obvious answer. Apparently not. But it seems I can't go buy a solution >> either. I guess there isn't much of a market (though I am just talking >> software - maybe someone could make an update :) ). >>
