Guys thanks for the feedback and direction. Some follow up to some of the questions\comments
-MPLS support is preferreded. -Uplinks to the core would be LACP Bundles at Nx10G. The majority of the traffic on the customer facing 10G ENNI's will be 10-100M EVC's. We would configure 10G Port with 2G CIR on this device, just not full 10G UNI Ports they would be put on a different device. -MEF Required -Erik -----Original Message----- From: Aaron Gould [mailto:aar...@gvtc.com] Sent: Thursday, April 13, 2017 5:41 PM To: Erik Sundberg; nanog@nanog.org Subject: RE: 10G MetroE 1-2U Switch Hi Eric, A year or 2 ago, I did a good bit of work looking at various MPLS-capable-PE boxes as I was looking to replace the investment of Cisco ME3600's that couldn't keep up the pace of our FTTH 10 gig link expansions... that ME3600 only had (2) 10 gig ports. Several links below are just a quick search I did on google to find some of this topics/discussions from the community. https://www.juniper.net/assets/kr/kr/local/pdf/case-studies/3520578-en.pdf https://lists.gt.net/nsp/juniper/54965 https://www.mail-archive.com/juniper-nsp@puck.nether.net/msg23974.html https://marc.info/?l=cisco-nsp&m=148839385119158&w=3 https://marc.info/?a=133372064700006&r=1&w=3 https://marc.info/?a=148839164700003&r=1&w=3 https://lists.gt.net/nsp/juniper/58182 https://puck.nether.net/pipermail/juniper-nsp/2015-October/031353.html https://lists.gt.net/nsp/juniper/58241 -----Original Message----- From: NANOG [mailto:nanog-bounces+aaron1=gvtc....@nanog.org] On Behalf Of Erik Sundberg Sent: Thursday, April 13, 2017 4:37 PM To: nanog@nanog.org Subject: 10G MetroE 1-2U Switch Hey Nanog, Looking for a new metroE Edge switch that has more that 10x 10G ports. I am having a hard time finding anything worthwhile without buying a full blown ASR9K Chassis or another vendor's chassis. Requirements MEF compliant 1-2U small foot print 10G Ports will be used for ENNI's and UNI Ports Prefer MPLS support for L2VPN's (EoMPLS and VPLS) QOS per Sub interface\vlan on a ENNI Cost effect 10G Ports 100G Not required Looking at the ASR920's - Great box for 1G but not enough 10G Ports Only 4 NCS5001/NCS5501 - New\unproven\probably buggy, Lacking some features & QOS issues :/ ASR900 - Looks good, but was hoping for a smaller foot print. If I remember right the 8x10G Cards can't go in every slot. Any other platforms I should be looking at? Ciena, Brocade, Juniper? Thanks in advance! -Erik ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you. ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you.
