Thanks I will post there as well
________________________________ From: Hiers, David <david.hi...@cdk.com> Sent: Thursday, August 9, 2018 10:11:33 AM To: James Milko; Ryan Finnesey Cc: nanog@nanog.org Subject: RE: Feedback - SBC Vendors. You might want to drop this question on the VoiceOps list: voice...@voiceops.org It runs at a good signal-to-noise ratio, so you'll get some useful responses. David -----Original Message----- From: NANOG [mailto:nanog-bounces+david.hiers=cdk....@nanog.org] On Behalf Of James Milko Sent: Thursday, August 09, 2018 7:06 AM To: Ryan Finnesey <r...@finnesey.com> Cc: nanog@nanog.org Subject: Re: Feedback - SBC Vendors. Which Ribbon product are you looking at? There are quite a few now and they have different code bases/features. JM On Wed, Aug 8, 2018 at 7:56 PM, Ryan Finnesey <r...@finnesey.com> wrote: > I am going to have to install a series of SBCs for a voice offering > connected to Microsoft Teams. We are going to pass the SIP traffic > off to a larger number of SIP providers. I would like to get some > feedback from the group on SBC vendors. I have two options for > vendors Ribbon or AudioCodes. I am leaning towards a software based SBC over > an appliance. > > Would be helpful to get the other members feedback on Ribbon or > AudioCodes deployments within their networks. > > Cheers > Ryan > > ---------------------------------------------------------------------- This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.
