On Thu, 23 Mar 2000 09:16:04 -0500, Joe Finlayson <jfinlay...@telica.com> wrote: >I am trying to gather information on equipment capable of >performing, at minimum, the lightning tests of Bellcore GR-1089-CORE 4.5.9, >Intrabuilding Lightning Surge. ... "at minimum" - the minimum test voltage shown, or - at least this style test (preferably, additional style tests)
In Table 4-4, Note 5, it says that IEEE C62.41 generators can be used for this test. IEC 61000-4-5 Surge generators also generate this waveform, although the series current limiting resistors are different. Given these additional standard references, there should be lots of equipment choices capable of this test. However, if you want to perform surge tests on the AC Power Port as well (section 4.5.10), be sure the unit can generate the higher voltages in Table 4-5. <snip>