--- In [EMAIL PROTECTED], "turbulatordude" <[EMAIL PROTECTED]> wrote: > > It looks like there are a lot of lower priced DC motors that might be > used with a servo driver, but it also seems these are lower voltage. > > The drivers I found so far are Jon's PICO , the Gecko and a Rutex. > > IMSERV has a $2,000 package for drivers but that is out of my league.
$2000 INCLUDES a NEW, UNUSED, NEW PRODUCTION, Made in USA, Sherline 5400 CNC ready milling machine and a fully assembled, 3-Axis servo controller, 3 NEW, UNUSED, NEW PRODUCTION, Made in USA, Globe servo motors w/ encoders and with timing belt reduction drive assemblies, all servo, power, and control cables, AND a license for DeskCNC software. The controller is mounted in a Nema 12 steel case, and has a cooling fan, safety enable circuit, E-stop, and probe input connection. The DeskCNC sontroller runs at 125,000 steps per second, which is plenty to run the servos at 112937 sps in 4X mode. You will need a 200 mhz(or faster) Windows computer running Win 98 or later, with a serial or USB port. Tiger Direct has new ones for $300. The machine rapids at 50 inches per minute on all 3 axes. Unassembled 3 axis kits are also available, starting at $675 for a TurboCNC DOS package or $899 for a DeskCNC. Unassembled does not mean solder the board up, it means wire up your own controller and put it in your own enclosure. All the components included in the kits are the same as we use in our assembled systems. Start here for an overview: http://www.imsrv.com/deskcnc/bench_top_cnc_systems.htm More details and more photos are here: http://www.cadcamcadcam.com Look under CNC kits and CNC systems > Kinda like the Xylotex is great for Sherlines and Geckos can handle > Bridgeports ? The DeskCNC servo system runs circles around the Xylotex on a Sherline, Taig, MaxNC, micro and mini mill. Fred Smith - IMService THE source for low cost Cad-Cam and desktop CNC Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
