Hi Michael, Please find attached the conf files of the slave machines(Slave1 and Slave2.txt) and Master(neo4j.conf) with this mail as per requested by you.
Regards, Yayati Sule Associate Data Scientist Innoplexus Consulting Services Pvt. Ltd. www.innoplexus.com Mob : +91-9527459407 Landline: +91-20-66527300 © 2011-16 Innoplexus Consulting Services Pvt. Ltd. Unless otherwise explicitly stated, all rights including those in copyright in the content of this e-mail are owned by Innoplexus Consulting Services Pvt Ltd. and all related legal entities. The contents of this e-mail shall not be copied, reproduced, or transmitted in any form without the written permission of Innoplexus Consulting Services Pvt Ltd or that of the copyright owner. The receipt of this mail is the acknowledgement of the receipt of contents; if the recipient is not the intended addressee then the recipient shall notify the sender immediately. The contents are provided for information only and no opinions expressed should be relied on without further consultation with Innoplexus Consulting Services Pvt Ltd. and all related legal entities. While all endeavors have been made to ensure accuracy, Innoplexus Consulting Services Pvt. Ltd. makes no warranty or representation to its accuracy, completeness or fairness and persons who rely on it do so entirely at their own risk. The information herein may be changed or withdrawn at any time without notice. Innoplexus Consulting Services Pvt. Ltd. will not be liable to any client or third party for the accuracy of the information supplied through this service. Innoplexus Consulting Services Pvt. Ltd. accepts no responsibility or liability for the contents of any other site, whether linked to this site or not, or any consequences from your acting upon the contents of another site. Please Consider the environment before printing this email. On Sun, May 15, 2016 at 10:28 PM, 'Michael Hunger' via Neo4j < neo4j@googlegroups.com> wrote: > Can you share the config files for all 3 machines? > > > Am 13.05.2016 um 01:35 schrieb yayati.s...@innoplexus.com: > > > > Hi, > > I am trying to setup multi Machine cluster for Neo4j 3.0.1(Milestone). I > am repeatedly getting the following error from my Log Files. > > > > 2016-05-13 06:26:35.251+0000 INFO Attempting to join cluster of [ > 192.168.0.231:5001, 192.168.1.90:5001, 192.168.1.183:5001] > > 2016-05-13 06:27:05.754+0000 ERROR Failed to start Neo4j: Starting Neo4j > failed: Component > 'org.neo4j.server.database.LifecycleManagingDatabase@51e5cc21' was > successfully initialized, but failed to start. Please see attached cause > exception. Starting Neo4j failed: Component > 'org.neo4j.server.database.LifecycleManagingDatabase@51e5cc21' was > successfully initialized, but failed to start. Please see attached cause > exception. > > org.neo4j.server.ServerStartupException: Starting Neo4j failed: > Component 'org.neo4j.server.database.LifecycleManagingDatabase@51e5cc21' > was successfully initialized, but failed to start. Please see attached > cause exception. > > at > org.neo4j.server.exception.ServerStartupErrors.translateToServerStartupError(ServerStartupErrors.java:68) > > at > org.neo4j.server.AbstractNeoServer.start(AbstractNeoServer.java:217) > > at > org.neo4j.server.ServerBootstrapper.start(ServerBootstrapper.java:81) > > at > org.neo4j.server.ServerBootstrapper.start(ServerBootstrapper.java:60) > > at > org.neo4j.server.enterprise.EnterpriseEntryPoint.main(EnterpriseEntryPoint.java:32) > > Caused by: org.neo4j.kernel.lifecycle.LifecycleException: Component > 'org.neo4j.server.database.LifecycleManagingDatabase@51e5cc21' was > successfully initialized, but failed to start. Please see attached cause > exception. > > at > org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:444) > > at > org.neo4j.kernel.lifecycle.LifeSupport.start(LifeSupport.java:107) > > at > org.neo4j.server.AbstractNeoServer.start(AbstractNeoServer.java:189) > > ... 3 more > > Caused by: java.lang.RuntimeException: Error starting > org.neo4j.kernel.ha.factory.HighlyAvailableFacadeFactory, > /home/yayati.sule/Master/neo4j-enterprise-3.0.1/data/databases/graph.db > > at > org.neo4j.kernel.impl.factory.GraphDatabaseFacadeFactory.newFacade(GraphDatabaseFacadeFactory.java:144) > > at > org.neo4j.kernel.ha.factory.HighlyAvailableFacadeFactory.newFacade(HighlyAvailableFacadeFactory.java:42) > > at > org.neo4j.kernel.ha.HighlyAvailableGraphDatabase.<init>(HighlyAvailableGraphDatabase.java:41) > > at > org.neo4j.server.enterprise.EnterpriseNeoServer.lambda$static$0(EnterpriseNeoServer.java:80) > > at > org.neo4j.server.database.LifecycleManagingDatabase.start(LifecycleManagingDatabase.java:89) > > at > org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:434) > > ... 5 more > > Caused by: org.neo4j.kernel.lifecycle.LifecycleException: Component > 'org.neo4j.cluster.client.ClusterJoin@d8af863' was successfully > initialized, but failed to start. Please see attached cause exception. > > at > org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:444) > > at > org.neo4j.kernel.lifecycle.LifeSupport.start(LifeSupport.java:107) > > at > org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:434) > > at > org.neo4j.kernel.lifecycle.LifeSupport.start(LifeSupport.java:107) > > at > org.neo4j.kernel.impl.factory.GraphDatabaseFacadeFactory.newFacade(GraphDatabaseFacadeFactory.java:140) > > ... 10 more > > Caused by: java.util.concurrent.TimeoutException > > at > org.neo4j.cluster.statemachine.StateMachineProxyFactory$ResponseFuture.get(StateMachineProxyFactory.java:300) > > at > org.neo4j.cluster.client.ClusterJoin.joinByConfig(ClusterJoin.java:143) > > at org.neo4j.cluster.client.ClusterJoin.start(ClusterJoin.java:82) > > at > org.neo4j.kernel.lifecycle.LifeSupport$LifecycleInstance.start(LifeSupport.java:434) > > > > I have also attached a copy of my "neo4j.conf" file . > > Kindly help me on this. > > > > -- > > You received this message because you are subscribed to the Google > Groups "Neo4j" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to neo4j+unsubscr...@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. > > <neo4j.conf> > > -- > You received this message because you are subscribed to the Google Groups > "Neo4j" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neo4j+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Neo4j" group. To unsubscribe from this group and stop receiving emails from it, send an email to neo4j+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
#***************************************************************** # Neo4j configuration #***************************************************************** # The name of the database to mount #dbms.active_database=graph.db # Paths of directories in the installation. #dbms.directories.data=data #dbms.directories.plugins=plugins #dbms.directories.certificates=certificates # This setting constrains all `LOAD CSV` import files to be under the `import` directory. Remove or uncomment it to # allow files to be loaded from anywhere in filesystem; this introduces possible security problems. See the `LOAD CSV` # section of the manual for details. dbms.directories.import=import # Whether requests to Neo4j are authenticated. # To disable authentication, uncomment this line #dbms.security.auth_enabled=false # Enable this to be able to upgrade a store from an older version. #dbms.allow_format_migration=true # The amount of memory to use for mapping the store files, in bytes (or # kilobytes with the 'k' suffix, megabytes with 'm' and gigabytes with 'g'). # If Neo4j is running on a dedicated server, then it is generally recommended # to leave about 2-4 gigabytes for the operating system, give the JVM enough # heap to hold all your transaction state and query context, and then leave the # rest for the page cache. # The default page cache memory assumes the machine is dedicated to running # Neo4j, and is heuristically set to 50% of RAM minus the max Java heap size. #dbms.memory.pagecache.size=10g # Enable online backups to be taken from this database. #dbms.backup.enabled=true # To allow remote backups, uncomment this line: #dbms.backup.address=0.0.0.0:6362 #***************************************************************** # Network connector configuration #***************************************************************** # Bolt connector dbms.connector.bolt.type=BOLT dbms.connector.bolt.enabled=true dbms.connector.bolt.tls_level=OPTIONAL # To have Bolt accept non-local connections, uncomment this line # dbms.connector.bolt.address=0.0.0.0:7687 # HTTP Connector dbms.connector.http.type=HTTP dbms.connector.http.enabled=true #dbms.connector.http.encryption=NONE # To have HTTP accept non-local connections, uncomment this line dbms.connector.http.address=0.0.0.0:7474 # HTTPS Connector dbms.connector.https.type=HTTP dbms.connector.https.enabled=true dbms.connector.https.encryption=TLS dbms.connector.https.address=localhost:7473 # Number of Neo4j worker threads. #dbms.threads.worker_count= #***************************************************************** # Logging configuration #***************************************************************** # To enable HTTP logging, uncomment this line #dbms.logs.http.enabled=true # To enable GC Logging, uncomment this line #dbms.logs.gc.enabled=true # GC Logging Options # see http://docs.oracle.com/cd/E19957-01/819-0084-10/pt_tuningjava.html#wp57013 for more information. #dbms.logs.gc.options=-XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCApplicationStoppedTime -XX:+PrintPromotionFailure -XX:+PrintTenuringDistribution # Number of GC logs to keep. #dbms.logs.gc.rotation.keep_number=5 # Size of each GC log that is kept. #dbms.logs.gc.rotation.size=20m # Size threshold for rotation of the debug log. If set to zero then no rotation will occur. Accepts a binary suffix "k", # "m" or "g". #dbms.logs.debug.rotation.size=20m # Maximum number of history files for the internal log. #dbms.logs.debug.rotation.keep_number=7 # Log executed queries that takes longer than the configured threshold. Enable by uncommenting this line. #dbms.logs.query.enabled=true # If the execution of query takes more time than this threshold, the query is logged. If set to zero then all queries # are logged. #dbms.logs.query.threshold=0 # The file size in bytes at which the query log will auto-rotate. If set to zero then no rotation will occur. Accepts a # binary suffix "k", "m" or "g". #dbms.logs.query.rotation.size=20m # Maximum number of history files for the query log. #dbms.logs.query.rotation.keep_number=7 #***************************************************************** # HA configuration #***************************************************************** # Uncomment and specify these lines for running Neo4j in High Availability mode. # See the High availability setup tutorial for more details on these settings # http://neo4j.com/docs/3.0.1/ha-setup-tutorial.html # Database mode # Allowed values: # HA - High Availability # SINGLE - Single mode, default. # To run in High Availability mode uncomment this line: dbms.mode=HA # ha.server_id is the number of each instance in the HA cluster. It should be # an integer (e.g. 1), and should be unique for each cluster instance. ha.server_id=3 # ha.initial_hosts is a comma-separated list (without spaces) of the host:port # where the ha.host.coordination of all instances will be listening. Typically # this will be the same for all cluster instances.192.168.1.90:5001 ha.initial_hosts=192.168.0.173:5001,192.168.1.183:5001 # IP and port for this instance to listen on, for communicating cluster status # information iwth other instances (also see ha.initial_hosts). The IP # must be the configured IP address for one of the local interfaces. #ha.host.coordination=127.0.0.1:5001 # IP and port for this instance to listen on, for communicating transaction # data with other instances (also see ha.initial_hosts). The IP # must be the configured IP address for one of the local interfaces. #ha.host.data=192.168.1.183:6365 # The interval at which slaves will pull updates from the master. Comment out # the option to disable periodic pulling of updates. Unit is seconds. ha.pull_interval=10 # Amount of slaves the master will try to push a transaction to upon commit # (default is 1). The master will optimistically continue and not fail the # transaction even if it fails to reach the push factor. Setting this to 0 will # increase write performance when writing through master but could potentially # lead to branched data (or loss of transaction) if the master goes down. #ha.tx_push_factor=1 # Strategy the master will use when pushing data to slaves (if the push factor # is greater than 0). There are three options available "fixed_ascending" (default), # "fixed_descending" or "round_robin". Fixed strategies will start by pushing to # slaves ordered by server id (accordingly with qualifier) and are useful when # planning for a stable fail-over based on ids. #ha.tx_push_strategy=fixed_ascending # Policy for how to handle branched data. #ha.branched_data_policy=keep_all # How often heartbeat messages should be sent. Defaults to ha.default_timeout. #ha.heartbeat_interval=5s # Timeout for heartbeats between cluster members. Should be at least twice that of ha.heartbeat_interval. #ha.heartbeat_timeout=11s # If you are using a load-balancer that doesn't support HTTP Auth, you may need to turn off authentication for the # HA HTTP status endpoint by uncommenting the following line. #dbms.security.ha_status_auth_enabled=false # Whether this instance should only participate as slave in cluster. If set to # true, it will never be elected as master. #ha.slave_only=false #***************************************************************** # Miscellaneous configuration #***************************************************************** # Enable this to specify a parser other than the default one. #cypher.default_language_version=3.0 # Determines if Cypher will allow using file URLs when loading data using # `LOAD CSV`. Setting this value to `false` will cause Neo4j to fail `LOAD CSV` # clauses that load data from the file system. #dbms.security.allow_csv_import_from_file_urls=true # Retention policy for transaction logs needed to perform recovery and backups. #dbms.tx_log.rotation.retention_policy=7 days # Limit the number of IOs the background checkpoint process will consume per second. # This setting is advisory, is ignored in Neo4j Community Edition, and is followed to # best effort in Enterprise Edition. # An IO is in this case a 8 KiB (mostly sequential) write. Limiting the write IO in # this way will leave more bandwidth in the IO subsystem to service random-read IOs, # which is important for the response time of queries when the database cannot fit # entirely in memory. The only drawback of this setting is that longer checkpoint times # may lead to slightly longer recovery times in case of a database or system crash. # A lower number means lower IO pressure, and consequently longer checkpoint times. # The configuration can also be commented out to remove the limitation entirely, and # let the checkpointer flush data as fast as the hardware will go. # Set this to -1 to disable the IOPS limit. # dbms.checkpoint.iops.limit=1000 # Enable a remote shell server which Neo4j Shell clients can log in to. #dbms.shell.enabled=true # The network interface IP the shell will listen on (use 0.0.0.0 for all interfaces). #dbms.shell.host=127.0.0.1 # The port the shell will listen on, default is 1337. #dbms.shell.port=1337 # Only allow read operations from this Neo4j instance. This mode still requires # write access to the directory for lock purposes. #dbms.read_only=false # Comma separated list of JAX-RS packages containing JAX-RS resources, one # package name for each mountpoint. The listed package names will be loaded # under the mountpoints specified. Uncomment this line to mount the # org.neo4j.examples.server.unmanaged.HelloWorldResource.java from # neo4j-server-examples under /examples/unmanaged, resulting in a final URL of # http://localhost:7474/examples/unmanaged/helloworld/{nodeId} #dbms.unmanaged_extension_classes=org.neo4j.examples.server.unmanaged=/examples/unmanaged
#***************************************************************** # Neo4j configuration #***************************************************************** # The name of the database to mount #dbms.active_database=graph.db # Paths of directories in the installation. #dbms.directories.data=data #dbms.directories.plugins=plugins #dbms.directories.certificates=certificates # This setting constrains all `LOAD CSV` import files to be under the `import` directory. Remove or uncomment it to # allow files to be loaded from anywhere in filesystem; this introduces possible security problems. See the `LOAD CSV` # section of the manual for details. dbms.directories.import=import # Whether requests to Neo4j are authenticated. # To disable authentication, uncomment this line #dbms.security.auth_enabled=false # Enable this to be able to upgrade a store from an older version. #dbms.allow_format_migration=true # The amount of memory to use for mapping the store files, in bytes (or # kilobytes with the 'k' suffix, megabytes with 'm' and gigabytes with 'g'). # If Neo4j is running on a dedicated server, then it is generally recommended # to leave about 2-4 gigabytes for the operating system, give the JVM enough # heap to hold all your transaction state and query context, and then leave the # rest for the page cache. # The default page cache memory assumes the machine is dedicated to running # Neo4j, and is heuristically set to 50% of RAM minus the max Java heap size. #dbms.memory.pagecache.size=10g # Enable online backups to be taken from this database. #dbms.backup.enabled=true # To allow remote backups, uncomment this line: #dbms.backup.address=0.0.0.0:6362 #***************************************************************** # Network connector configuration #***************************************************************** # Bolt connector dbms.connector.bolt.type=BOLT dbms.connector.bolt.enabled=true dbms.connector.bolt.tls_level=OPTIONAL # To have Bolt accept non-local connections, uncomment this line # dbms.connector.bolt.address=0.0.0.0:7687 # HTTP Connector dbms.connector.http.type=HTTP dbms.connector.http.enabled=true #dbms.connector.http.encryption=NONE # To have HTTP accept non-local connections, uncomment this line dbms.connector.http.address=0.0.0.0:7474 # HTTPS Connector dbms.connector.https.type=HTTP dbms.connector.https.enabled=true dbms.connector.https.encryption=TLS dbms.connector.https.address=localhost:7473 # Number of Neo4j worker threads. #dbms.threads.worker_count= #***************************************************************** # Logging configuration #***************************************************************** # To enable HTTP logging, uncomment this line #dbms.logs.http.enabled=true # To enable GC Logging, uncomment this line #dbms.logs.gc.enabled=true # GC Logging Options # see http://docs.oracle.com/cd/E19957-01/819-0084-10/pt_tuningjava.html#wp57013 for more information. #dbms.logs.gc.options=-XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCApplicationStoppedTime -XX:+PrintPromotionFailure -XX:+PrintTenuringDistribution # Number of GC logs to keep. #dbms.logs.gc.rotation.keep_number=5 # Size of each GC log that is kept. #dbms.logs.gc.rotation.size=20m # Size threshold for rotation of the debug log. If set to zero then no rotation will occur. Accepts a binary suffix "k", # "m" or "g". #dbms.logs.debug.rotation.size=20m # Maximum number of history files for the internal log. #dbms.logs.debug.rotation.keep_number=7 # Log executed queries that takes longer than the configured threshold. Enable by uncommenting this line. #dbms.logs.query.enabled=true # If the execution of query takes more time than this threshold, the query is logged. If set to zero then all queries # are logged. #dbms.logs.query.threshold=0 # The file size in bytes at which the query log will auto-rotate. If set to zero then no rotation will occur. Accepts a # binary suffix "k", "m" or "g". #dbms.logs.query.rotation.size=20m # Maximum number of history files for the query log. #dbms.logs.query.rotation.keep_number=7 #***************************************************************** # HA configuration #***************************************************************** # Uncomment and specify these lines for running Neo4j in High Availability mode. # See the High availability setup tutorial for more details on these settings # http://neo4j.com/docs/3.0.1/ha-setup-tutorial.html # Database mode # Allowed values: # HA - High Availability # SINGLE - Single mode, default. # To run in High Availability mode uncomment this line: dbms.mode=HA # ha.server_id is the number of each instance in the HA cluster. It should be # an integer (e.g. 1), and should be unique for each cluster instance. ha.server_id=2 # ha.initial_hosts is a comma-separated list (without spaces) of the host:port # where the ha.host.coordination of all instances will be listening. Typically # this will be the same for all cluster instances. ha.initial_hosts=192.168.0.231:5001,192.168.1.90:5001,192.168.1.183:5001 # IP and port for this instance to listen on, for communicating cluster status # information iwth other instances (also see ha.initial_hosts). The IP # must be the configured IP address for one of the local interfaces. #ha.host.coordination=127.0.0.1:5002 # IP and port for this instance to listen on, for communicating transaction # data with other instances (also see ha.initial_hosts). The IP # must be the configured IP address for one of the local interfaces. #ha.host.data=127.0.0.1:6001 # The interval at which slaves will pull updates from the master. Comment out # the option to disable periodic pulling of updates. Unit is seconds. ha.pull_interval=10 # Amount of slaves the master will try to push a transaction to upon commit # (default is 1). The master will optimistically continue and not fail the # transaction even if it fails to reach the push factor. Setting this to 0 will # increase write performance when writing through master but could potentially # lead to branched data (or loss of transaction) if the master goes down. #ha.tx_push_factor=1 # Strategy the master will use when pushing data to slaves (if the push factor # is greater than 0). There are three options available "fixed_ascending" (default), # "fixed_descending" or "round_robin". Fixed strategies will start by pushing to # slaves ordered by server id (accordingly with qualifier) and are useful when # planning for a stable fail-over based on ids. #ha.tx_push_strategy=fixed_ascending # Policy for how to handle branched data. #ha.branched_data_policy=keep_all # How often heartbeat messages should be sent. Defaults to ha.default_timeout. #ha.heartbeat_interval=5s # Timeout for heartbeats between cluster members. Should be at least twice that of ha.heartbeat_interval. #ha.heartbeat_timeout=11s # If you are using a load-balancer that doesn't support HTTP Auth, you may need to turn off authentication for the # HA HTTP status endpoint by uncommenting the following line. #dbms.security.ha_status_auth_enabled=false # Whether this instance should only participate as slave in cluster. If set to # true, it will never be elected as master. #ha.slave_only=false #***************************************************************** # Miscellaneous configuration #***************************************************************** # Enable this to specify a parser other than the default one. #cypher.default_language_version=3.0 # Determines if Cypher will allow using file URLs when loading data using # `LOAD CSV`. Setting this value to `false` will cause Neo4j to fail `LOAD CSV` # clauses that load data from the file system. #dbms.security.allow_csv_import_from_file_urls=true # Retention policy for transaction logs needed to perform recovery and backups. #dbms.tx_log.rotation.retention_policy=7 days # Limit the number of IOs the background checkpoint process will consume per second. # This setting is advisory, is ignored in Neo4j Community Edition, and is followed to # best effort in Enterprise Edition. # An IO is in this case a 8 KiB (mostly sequential) write. Limiting the write IO in # this way will leave more bandwidth in the IO subsystem to service random-read IOs, # which is important for the response time of queries when the database cannot fit # entirely in memory. The only drawback of this setting is that longer checkpoint times # may lead to slightly longer recovery times in case of a database or system crash. # A lower number means lower IO pressure, and consequently longer checkpoint times. # The configuration can also be commented out to remove the limitation entirely, and # let the checkpointer flush data as fast as the hardware will go. # Set this to -1 to disable the IOPS limit. # dbms.checkpoint.iops.limit=1000 # Enable a remote shell server which Neo4j Shell clients can log in to. #dbms.shell.enabled=true # The network interface IP the shell will listen on (use 0.0.0.0 for all interfaces). #dbms.shell.host=127.0.0.1 # The port the shell will listen on, default is 1337. #dbms.shell.port=1337 # Only allow read operations from this Neo4j instance. This mode still requires # write access to the directory for lock purposes. #dbms.read_only=false # Comma separated list of JAX-RS packages containing JAX-RS resources, one # package name for each mountpoint. The listed package names will be loaded # under the mountpoints specified. Uncomment this line to mount the # org.neo4j.examples.server.unmanaged.HelloWorldResource.java from # neo4j-server-examples under /examples/unmanaged, resulting in a final URL of # http://localhost:7474/examples/unmanaged/helloworld/{nodeId} #dbms.unmanaged_extension_classes=org.neo4j.examples.server.unmanaged=/examples/unmanaged
neo4j.conf
Description: Binary data
