I'm using a Picaxe 08M, and an IN-14 tube, a standard 74141 driver, and a Tayloredge power supply. I had a similar problem some months back, and the fix I used last time, isn't cutting it this go round. When pin 4 goes high (output) both the Zero, and Nine light up at the same time. I know my code is good, and all my grounds are good, the legs of the HVPS, the 74141, and the Picaxe are all grounded by way of capacitor. I checked all voltages, all measure about 4.95V, and the current sits at 1.30mA in low state and 0V when in high state. All other numbers, 1-8, work perfectly, but the two digits that require pin 4, don't work properly. Any suggestions? Something I overlooked? Dumb mistake I made?
Thanks Shane -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to neonixi...@googlegroups.com. To unsubscribe from this group, send email to neonixie-l+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
