The clock did not seem to respond in any way, even to significant changes in the SW adjustment which led me to believe something was hosed!
Yep. I'm with you on the Maxim sample thing! On Oct 30, 12:06 pm, Adam Jacobs <a...@jacobs.us> wrote: > I think that you should have found (unless your clock goes through radical > changes in temperature) that there was a time correction that you could > apply to make your clock behave "close enough".. Obviously a TCXO is the > easiest answer, provided you have $10 to spend on a DS32khz (or know that > maxim-ic gives the things away by the fistful if you ask). :D > > -Adam > > > > On Sat, Oct 30, 2010 at 9:46 AM, MichaelB <mbari...@dslextreme.com> wrote: > > Bottom line, the adjustment via the controller had no effect on this > > accuracy issue. I ended up changing out the TCXO with a new one > > and..problem solved. No noticeable drift on more than one week. I > > guess I must have fried the first one during the building of the > > clock. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to neonixi...@googlegroups.com. To unsubscribe from this group, send email to neonixie-l+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
