Ah i see, so thats why i havent found anything on your site. The good thing, i guess, is that you already have the neon somewhat sorted out. How much did the neon cost you?
On Monday, May 21, 2012 12:38:00 PM UTC+1, Jens Boos wrote: > > Hi, > > oh, I started reading myself into the topic in November, but I had several > difficulties on the way. I am currently writing down my experiences so far, > I will create a new section for that on my website, but it will take > another two weeks or so. > > I have not managed to create a glow lampe or something yet, but I am > confident that I will be able to do so in the next month. I work with soda > lime glass and a primitive soldering torch that you cal buy in any hardware > store, and I even managed to create simple pinch seals that are vacuum > tight. I have some Neon here in a pressure bottle, but I have some vacuum > problems in my setup. The pump is a two-stage rotary pump that goes down to > 5E-3 mbar, but I still need a needle valve to insert the Neon gas into the > tube and a proper tube connection. > > If you count the "buts" in my sentences you can see that there is a lot of > stuff to figure out :-) > > It is very exciting, but also quite time consuming. At the moment I am > building a better power supply with a little more juice; 300V and 10mA are > a little wimpy. > > Jens > > > And how are you doing with your homemade nixies? I didnt know you also > tried to make some util i read your comment on that video. > > On Sunday, May 20, 2012 11:36:27 PM UTC+1, Jens Boos wrote: >> >> Nice pictures! I have a video somewhere around here with a broken CD47 >> in a vacuum bell filled with 2%Ar98%Ne, the pressures are in the same >> range (but only down to 3 Torr or so). >> >> Jens >> >> >> > It's my old experiment, but I think that it would be helpful: >> > >> > http://tubedevices.com/alek/pwl/wyladowania/wyladowania_e.htm >> > >> >> -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To view this discussion on the web, visit > https://groups.google.com/d/msg/neonixie-l/-/VQUfcDFc1cIJ. > To post to this group, send an email to neonixie-l@googlegroups.com. > To unsubscribe from this group, send email to > neonixie-l+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/neonixie-l?hl=en-GB. > > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To view this discussion on the web, visit https://groups.google.com/d/msg/neonixie-l/-/pEaqF1pbKwoJ. To post to this group, send an email to neonixie-l@googlegroups.com. To unsubscribe from this group, send email to neonixie-l+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
