Hi guys, I'm preparing high res pics now, resolution should be 10000x1500 
JPEG format, will let you know when it's finished.
It's a little difficult to take these photos, especially it's hard to 
highlighting of the edge of glass tube, I use two light boxes and two light 
screens, and a flash lamp for front lighting.
Another important equipment is camera remote controller, this will hold the 
same shooting range for each digits, tube and camera must not have the 
slightest move.
Camera and lens is important ofcourse, but Canon 5D Mark II with EF 100mm 
1:2.8L IS USM is very good at capture details of tube.
Just waiting for a moment, high res pics will be ready soon.
Yan.

PS: high res picture is so nice like this:

<https://lh3.googleusercontent.com/-CUswx0FLplE/VoTxPzhRN3I/AAAAAAAAAE8/C-nzUiyHrL0/s1600/tube.jpg>


<https://lh3.googleusercontent.com/-q1y6t1PtuUo/VoT0eKIaMkI/AAAAAAAAAFI/mKE3UdQs58M/s1600/canon.jpg>


<https://lh3.googleusercontent.com/-hDDlhvLJ4LI/VoT1MNodBzI/AAAAAAAAAFU/u8x_GSEcpLc/s1600/can.jpg>

<https://lh3.googleusercontent.com/-9Jm7s37OQbk/VoT1PcAmGTI/AAAAAAAAAFc/RE_CBKv3D70/s1600/2.jpg>







在 2015年12月30日星期三 UTC+8上午12:50:21,严泽远写道:
>
> Hello everyone, I'd like to show you some pictures of 42 kinds of 
> different Nixie Tubes, I took these pictures after I finish my Divergence 
> Meter project, some of these tubes are very rare, if you like high 
> resolution pictures of one of these tubes please let me know.
>
> B-5441 (Burroughs U.S.A.) Diameter:19mm
>
> B-5750 (Burroughs U.S.A.) Diameter:13mm
>
> CD66 (Rodan Japan) Diameter:19mm
>
> CD71 (Rodan Japan) Diameter:9.5mm
>
> CD81 (Rodan Japan) Diameter:13mm
>
> CD83P (Rodan Japan) Diameter:13mm
>
> CD90P (Rodan Japan) Diameter:9.5mm
>
> IN-8 (Melz USSR) Diameter:19mm
>
> IN-8 Type2 (Melz USSR) Diameter:19mm
>
> IN-8-2 (Melz USSR) Diameter:19mm
>
> IN-14 (Rovno USSR) Diameter:19mm
>
> IN-14 Type2 (Rovno USSR) Diameter:19mm
>
> IN-14 Type3 (Rovno USSR) Diameter:19mm
>
> IN-16 (Rovno USSR) Diameter:16mm
>
> IN-18 (Rovno USSR) Diameter:30mm
>
> LD-836 (NEC Japan) Diameter:12 x 16mm
>
> NL-812 (National U.S.A.) Diameter:21MM
>
> NL-821 (National U.S.A.) Diameter:19MM
>
> NL-841 (National U.S.A.) Diameter:19MM
>
> NL-901 (National U.S.A.) Diameter:19MM
>
> NL-5440A (National U.S.A.) Diameter:19MM
>
> NL-5440A Type2 (National U.S.A.) Diameter:19MM
>
> NL-5560 (National U.S.A.) Diameter:13MM
>
> NL-5859 (National U.S.A.) Diameter:13MM
>
> NL-5750 (National U.S.A.) Diameter:13MM
>
> QS16-12 (南昌 China) Diameter:16MM
>
> QS18-12 (新光 China) Diameter:18MM
>
> QS18C (新光 China) Diameter:18MM
>
> XN1 (HIVAC England) Diameter:19MM
>
> XN1 Type2 (HIVAC England) Diameter:19MM
>
> XN3 (HIVAC England) Diameter:19MM
>
> Z566M (RFT Germany) Diameter:30MM
>
> Z570M (RFT Germany) Diameter:19MM
>
> Z570M Type2 (RFT Germany) Diameter:19MM
>
> ZM1000 (PHILIPS Holland) Diameter:19MM
>
> ZM1000R (VOLVO Germany) Diameter:19MM
>
> ZM1010 (PHILIPS Holland) Diameter:19MM
>
> ZM1020 (Telefunken Germany) Diameter:19MM
>
> ZM1042 (TESLA Czech) Diameter:30MM
>
> ZM1080 (Telefunken Germany) Diameter:19MM
>
> ZM1082T (TESLA Czech) Diameter:19MM
>
> ZM1240 (SIEMENS Germany) Diameter:19MM
>
> This is the group photo with my new work: Divergence Meter, please note 
> there's an AA battery on the right for reference.
>
>
> Boxes of these tubes: 
>
>
> This picture will show you how to take these photos, a special board can 
> switch digit display controlled by IR remote to prevent the shaking if use 
> a button on board:
>
>
> <https://lh3.googleusercontent.com/-qOVvhwbnYfA/VoK48jzsZDI/AAAAAAAAAEo/r4jl9BnoS_g/s1600/QQ%25E6%2588%25AA%25E5%259B%25BE20151230004345.jpg>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to neonixie-l+unsubscr...@googlegroups.com.
To post to this group, send an email to neonixie-l@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/01a89685-5015-44b1-98cb-e962a77e5999%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to