Hi Jonathan,
Can you describe which parameters are being tested? Or is it only a good/faulty test? eric Van: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] Namens Keith Moore Verzonden: maandag 16 mei 2016 16:26 Aan: neonixie-l Onderwerp: [neonixie-l] Re: my selfmade nixie-tester, came out very accurate Jonathan, This is FANTASTIC! Thank you! - Keith On Sunday, May 15, 2016 at 2:38:50 PM UTC-4, SWISSNIXIE - Jonathan F. wrote: Hello ! Today i finished a little projects that i made from mostly parts that were sitting around in the workshop for some time. Its a small nixie tester that i can use to test and control tubes. It uses basically a rotary encoder to switch between the digits. It also can measure the supply voltage, voltage after anode resistor, and the anode resistor itself. When i was planing the project, i was hoping to get something near a accurate measurement of it, maybe something like 170V-175V-180V. But as i checked with a Fluke177 Multimeter, it turned out to be accurate to about 1V ! Which is more than good in case of nixies. Maybe someone can also make use of it, so i thought i share! Schematic,Eagle Files, and Arduino-Code are attached! :) <https://groups.google.com/group/neonixie-l/attach/3a60fd7b46c9/Auto%20Generated%20Inline%20Image%201?part=0.4&authuser=1> <https://groups.google.com/group/neonixie-l/attach/3a60fd7b46c9/Auto%20Generated%20Inline%20Image%202?part=0.5&authuser=1> <https://groups.google.com/group/neonixie-l/attach/3a60fd7b46c9/Auto%20Generated%20Inline%20Image%203?part=0.6&authuser=1> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/23c53ac4-bdcc-4660-841e-2f08bebdc3b8%40googlegroups.com <https://groups.google.com/d/msgid/neonixie-l/23c53ac4-bdcc-4660-841e-2f08bebdc3b8%40googlegroups.com?utm_medium=email&utm_source=footer> . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/!%26!AAAAAAAAAAAYAAAAAAAAAPDddShx705MuX20yCpp0vvCgAAAEAAAAMMtsjeAKDtItxYbN8vz29UBAAAAAA%3D%3D%40zeelandnet.nl. For more options, visit https://groups.google.com/d/optout.