Well great news. Dalibor is shipping my tubes today!
I am getting close to having the clock base done and ready for sanding and anodizing. I have a sample at the anodizer now to see what grit sandpaper I need to sand the aluminum. The hard coat will fill in some so I need to see that it matched the brushed brass properly. I have the PV board set up at 180VDC with the 8.2K resistor for Dalibor's tubes. What value resistor would be best for the 4mm wire end neon bulbs Pete supplied with the kit at this voltage? Thanks everyone for helping me out on this. <https://lh3.googleusercontent.com/-7dwzM9s8A9c/WdTP85IWWDI/AAAAAAAABM8/iX1XXv8v0f8ZM1dN1qZ8haacStM05ZzbACL4CGAYYCw/s1600/IMG_20171002_132447563_HDR.jpg> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/2ba3a050-6440-42a1-bd6d-b12a1e1ef012%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
