An aside:  If that board gets buried in a hard to open box, consider "gluing" 
the clear plastic sides on those 3mm sockets. It sometimes doesn't take very 
much angled force on the plug [like a cable pull] to pop the side off.

John K
  ----- Original Message ----- 
  From: newxito 
  To: neonixie-l 
  Sent: Thursday, October 12, 2017 10:26 PM
  Subject: [neonixie-l] How many push-buttons for settings?


  My first clock did not have any buttons because there was nothing to adjust. 
For my next clock I plan to use 6 buttons. I already made a prototype of the 
connector PCB.

  button Menu: navigates through menus, menu numbers are shown on the left 
nixies

  button Set: navigates through possible values for a menu, value numbers are 
shown on the center nixies

  button Esc: always returns to clock mode

  button Red, Green and Blue: directly set brightness level if in rgb colors 
menu. The current level (0-16) is shown on the right nixies. 



  Example: 

  Menu 8 = led mode: 

  Value 1 = off, 2 = constant, 3 = hour, 4 = transition

  Menu 9 = led colors:

  Value 0 – 23 = hours, 24 = constant color

                          Level Red 0-16 (shown on right nixies if button Red 
pressed, press button Red again to adjust to next level)

                          Same for button Blue and Green.



  What do you think about this? Too many buttons?

  It’s just a hobby, I don’t sell the clocks but maybe I will give some away to 
friends and relatives. My experience is that older people (like me) have 
problems with multi-functional or timed buttons. I think that the Esc button is 
important if I must give “remote support”.


  -- 
  You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to neonixie-l+unsubscr...@googlegroups.com.
  To post to this group, send email to neonixie-l@googlegroups.com.
  To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/2b2be45a-01b3-4fd5-8888-26ea18f64ec6%40googlegroups.com.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to neonixie-l+unsubscr...@googlegroups.com.
To post to this group, send an email to neonixie-l@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/C16A22E85C1F4701816007F472970A27%40compunet4f9da9.
For more options, visit https://groups.google.com/d/optout.

Reply via email to