On Friday, January 5, 2018 at 6:48:39 AM UTC-5, newxito wrote: > > I was asked by a friend to build a cheap nixie clock. That's the result, > the 48 Swiss chocolates in this box were much more expensive than the clock > :-) >
Nice. BTW, a handy tip - if you don't have the official ribbon cable cutting tool, you can crimp the connector as shown in your picture and then run a NEW, SHARP razor blade / box-cutter blade along the connector body to slice off the ribbon cable "tail". It takes a little practice to get the angle right, but you end up with a much cleaner connector. If the cut leaves wire "whiskers", your blade is either too dull or you're cutting at the wrong angle. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/4ea65380-b618-4771-9308-bdb23689fb75%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.