Many Many years ago (1980 ish) I was involved in what were known at the time as Microcomputer Terminals. These were Z80 based machines running CP/M which used serial Terminals (VDU's) for I/O. We created some software which required custom key caps so I (as the junior!) was sent off with a bag of blank keys down to a local company who engraved lettering into the surface of the keys which was then filled with some white paint - et voila - customised keycaps. Wind the clock forward 40 years (that's scary!) and things like cnc routers are more common place - I have a desktop CNC router myself and I can see that it would be no major issue to cut letters and words into the surface of a blank key. Assuming one had or had access to a small router, that would be a way of achieving your goal. Just my 2 cents as they say! Richard
On Wednesday, 15 January 2020 15:46:10 UTC, newxito wrote: > > The 14 neons for the dots and minus sign are now installed and everything > seems to work fine. The board with the switches is also fully assembled, it > uses a HT16K33. I will start with this keyboard layout. I have to start now > designing the case, that’s the hardest part of this project. If the case > looks ok, I probably will design a new board with more keys and functions > and buy some custom keycaps. By the way, custom keycaps seem to be really > expensive! > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/3239827b-473f-413e-8b57-2aa3b542e3fd%40googlegroups.com.