I'm measuring a thickness of 0.4mm and a spacing of 4.8mm On Tuesday, December 29, 2020 at 11:32:14 AM UTC+1 eds_eq...@verizon.net wrote:
> I'm hoping somebody here can help me. I am designing a circuit board for > my own Nixie tube clock using the Russian IN-12 nixies with four INS-1 > tubes as Colons. And ESP-32 to sync to NTP. I need to know the lead > diameter and Lead spacing so I can put an appropriate footprint on the > board for each tube. I purchased 100 of these tubes a while back very > cheaply, and would just measure them, but they have currently Gone Missing. > > If any of you can supply this information it would be very helpful, as > those Footprints are all I need to finish making the board. yes, I have > tried to Google this information, with no luck. I can find the tube length > and diameter, as well as the current and operating voltage, but no > specifications on the leads. > > > Thanks > Ed > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/671fcb7f-9af0-48f0-b429-9516fb18d85cn%40googlegroups.com.