If I may... socket no.3 for LL-55(X) - https://nixietester.com/project/nixie-sockets/ drivers: https://nixietester.com/project/nixie-socket-driver/
Maybe it's something that will help you in your project. On Sunday, June 27, 2021 at 12:57:23 PM UTC+2 Dekatron42 wrote: > Yes, driving simple Nixies and saving the number of wires needed is what I > am looking for (without having to invent the wheel again). > > I'd like to drive a bunch of the LL-55(X) Nixies displaying letters and > also the LC513/A displaying digits in a string of perhaps 50 or so Nixies. > I'd be using a few small switching PSUs so that I'd only have to run the HV > line a short distance and also to keep the voltage drop down on the HV wire. > > /Martin > > On Sunday, 27 June 2021 at 08:26:28 UTC+2 newxito wrote: > >> Another reason for a smart socket, is that you could use less wires to >> drive the nixies. I built a socket for the R|Z568M, so I was able to >> control the whole clock (6 Nixies, 4 Neons) with only 5 wires (GND, + 5V, + >> 170V and 2 for I2C) even over a longer distance (about 1.5 meters). After >> soldering the GND wire to the metal construction, all problems vanished, >> and the clock is now working flawless. >> [image: lampclock.jpg] >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/6525934c-69a2-47d1-a43d-78e6511779bcn%40googlegroups.com.