I should have guessed, thanks very much. Now, if I could only move these projects beyond glacial pace….
> On Jun 28, 2022, at 11:11 PM, gregebert <gregeb...@hotmail.com> wrote: > > I use these: > https://www.ebay.com/itm/184292653297?hash=item2ae8b2b8f1:g:kigAAOSwfDBgEr4h > > > > > > >> On Tuesday, June 28, 2022 at 1:42:23 PM UTC-7 SD wrote: >> Thanks for the info. What are the pin dimensions/diameter? I tried some >> pins i had from other projects but the Burroughs’ are too large to fit. >> >> Thanks >> Scott >> >> >>>> On Jun 3, 2022, at 10:57 PM, Richard Scales <ric...@scalesweb.co.uk> wrote: >>>> >>> I have sockets for these. There are also 'smart sockets' which include a >>> PIC microcontroller which does all the 'heavy lifting' making it very easy >>> to drive. >> >>> >>> I also have a design for a single tube clock which incorporates a 'smart >>> socket'. >>> - Richard >>> >>> >>>>> On Tuesday, 17 May 2022 at 18:47:21 UTC+1 Paul Andrews wrote: >>>>> This is one I made a while back. It uses the tube socket pins that LB(?) >>>>> referred to. I see it isn't very well labelled, in terms of what value of >>>>> resistors to use, and it uses surface mount resistors. Anyway, there it >>>>> is. https://oshpark.com/shared_projects/G9c1wPoq >>>>> >>>>>> On Monday, May 16, 2022 at 5:02:23 PM UTC-4 SD wrote: >>>>>> Hello >>>>>> I was referred to this mail list, thank you >>>>>> I am sitting on for years a 7971 that I want to use/adapt but cannot >>>>>> find any sockets from ebay that are not very expensive. I do not want to >>>>>> permanently solder to a perfboard, etc. these things are super pricey >>>>>> now. >>>>>> any help appreciated >>>>>> >>>>>> thanks >>>>>> scott >>>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "neonixie-l" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/neonixie-l/9SqOYOIF91A/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> neonixie-l+...@googlegroups.com. >>> To view this discussion on the web, visit >>> https://groups.google.com/d/msgid/neonixie-l/b764a216-f01a-4d51-827d-b82a4de5a75fn%40googlegroups.com. > > -- > You received this message because you are subscribed to a topic in the Google > Groups "neonixie-l" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/neonixie-l/9SqOYOIF91A/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > neonixie-l+unsubscr...@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/7b9936da-eb0d-4978-bdfb-a7298bccfbben%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/1A668A81-77AF-433B-BCF8-103CAEB450FD%40gmail.com.
