I never thought using a cathode as anode... I just tested , plugging the number 8 on +170V, all the other number are working when grounded. same with the number 4. those two numbers gave the best results. good idea to recycle them on a clock...
I think use it for test purposes, with a 3D printed support : https://www.thingiverse.com/thing:4571828 I will first try a rear windows defogger repair kit... Le lundi 20 mars 2023 à 17:27:21 UTC+1, gregebert a écrit : > Atom Adhesives sells electrically-conductive adhesives, but be aware of > the cost. It's probably best to get a new tube, because any vibration or > movement is likely to break-off the bond. Remember- you cant use a large > glob like regular adhesives to add bonding-strength because it will short > to adjacent pins. [OK, you could put sleeves on all of the other pins, > apply an insulating layer of non-conductive epoxy, then bond over all that > with a large glob of conductive epoxy. What a mess.....] > I've only used their thermally-conductive epoxy and it works nicely. > > Another option is if you dont need all 10 digits, you might be able to use > one of them as an anode. I've never actually done that before, but it's > theoretically possible. > > On Monday, March 20, 2023 at 5:50:57 AM UTC-7 Benoit Tourret wrote: > >> Hello, do you know if there is a way to fix a broken wire on a IN-8-2 >> nixie, it is cut just at the level of the glass. and, of course, this is >> the anode... >> do you think that a conductive glue could work ? >> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/c0206606-c368-47e2-b62e-f2e85d686ec3n%40googlegroups.com.
