Have any of you successfully used the quad LME49740 in the Series 1e?
At the advice of my tech I swapped the chips in a couple channels to test and they sounded GREAT for a while. Big, clear, extended soundstage... I also replaced the 5534 with the LME49710. After a little while I started having noise issues on power up and the PSU (ps-4) was having problems.
The tech fixed a blown cap in the psu and I put all the old chips back in the desk to get it all up and running again.
After hearing how great the channels were with the better chips I was hoping there was a way to get them working without causing other problems. Perhaps there are certain chips that work better in different parts of the circuit. I would appreciate any advice. As you can tell, I am not much of a tech. Thanks!
Mark Sent from my iPod ------ You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to [email protected]. The Neotek list is lovingly hosted by Catapult Web Development. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek ! Thanks.
