Ike, Well I came across and aquired some large analog VU meters for Neotek Elite(I think,). The driver boards identified them as Neotek. I have a 2 year old Elan II 32 channel console that I am very happy with BUT, when I ordered it, I was referencing the picture supplied on the Sytek website and assumed(uh oh)that the model shown, with VUs, was a basic feature on the master section but alas it is not. When it arrived as ordered, no VU redundent Master meters as I had figured it would be. So, since I got the bomb deal on a whole slew of meters, I figured I would install them on the master buss and possibly channels 25-32 returns as they have no metering. I've used VUs very often in my past setups and old habits die hard I guess. The Elan II has 3 master buss outs so I figured it would be easy to set that up as I am only using one output to my Lynx I/O card on the computer for the 2 track masters. What do you think?
-----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of Ike Zimbel Sent: Tuesday, January 27, 2009 3:38 PM To: [email protected] Subject: Re: NEOTEK: Neotek Elite Sifam meter assembly pinout Hi Dan, It's 35 volts DC, unregulated. It is a separate power supply section, dedicated to the current demands of the LED's in the led meters. I'm not near my PS-3 right now, but I believe the status LED for that voltage actually says "Meter" on the front panel. This has nothing to do with, nor should it, with the +/-18 volt power supply rails, which is for the audio circuitry in your console. What's cooking, anyway? best, Ike Dan Gomez wrote: > Awsome, Thanks Ike. Is the 35VDC or AC? Also, if DC, is that a swing > difference as a result of +18 & -18? > > Thanks again! > > Dan at Destiny Studios > > -----Original Message----- > From: [email protected] [mailto:[email protected]]on > Behalf Of Ike Zimbel > Sent: Tuesday, January 27, 2009 11:16 AM > To: [email protected] > Subject: Re: NEOTEK: Neotek Elite Sifam meter assembly pinout > > > > Hi Dan, > Here's what I have for Circuit board 480144-00: > P-1 -1: n/c? > P-1-2: +35 vdc (meter power supply) > P-1-3: 35 vdc ground > P-1-4: +18vdc (Audio Power supply) > P1-5: -18vdc (Audio Power supply) > P-1-6: Audio Ground > P-1-7: n/c > P-1-8: n/c > P-1-9: Audio input signal > P-1-10: Audio input signal ground > Notes: The 35v is just for the meter lamps, nothing else. > The connections marked n/c are actually not listed at all on the drawing. > best, > Ike > > Dan Gomez wrote: > >> Can some one provide me with pinout on the Elite Sifam meter driver >> board? Dont forget to tell me which one is pin 1! Thanks all. >> >> Dan at Destiny Studios >> >> [Dan Gomez] >> >> > -- > Ike Zimbel > Zimbel Audio Productions Ltd. > Toronto > 416-720-0887 > "Studio House Calls" - Repairs and upgrades to analog audio equipment > including: Amek, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more. > > > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to > mailto:[email protected] with "unsubscribe neotek" in the message > body. If you have any difficulties, or questions --please send an email to > mailto:[email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any > message or reply sent to the list will be automatically forwarded to all > subscribers. > > Vive Le Neotek! > > Thanks. > > > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. > > Vive Le Neotek! > > Thanks. > > > -- Ike Zimbel Zimbel Audio Productions Ltd. Toronto 416-720-0887 "Studio House Calls" - Repairs and upgrades to analog audio equipment including: Amek, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more. ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks. ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
