Don -- Thanks for the help. With regards to your comments:
> I'm a little confused by the "we can hear the level changing" bit. I didn't explain this well. The test we were running was to put a 1k tone on (from the board) and patch the output of the each buss to channel line input 1, turn the pot up and down while watching the channel 1 meter and listening to the tone. We get about the same level for all of the busses except buss 1, which doesn't show up on the meter. But we can vaguely hear it through the monitors and we can hear that the level changes as we turn the pot. >> 2. Does anybody have any idea what to look for? > > Are you getting + (pin 4) and - (pin 11) power to the TL074? We will check that first thing tomorrow. Best, Matt ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
