Hi Barak,
Try
this:http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&site=ca&keywords=a30966-nd&x=0&y=0
Note that this will only work at the end of the ribbon because it is
"closed end" rather than "feed through". For some reason, the feed
through ones only come in 15 pin versions in this catalogue. Note also
that this link is for the Canadian site, so you will have to "change
country" to get the NL version. One more note, there may be a couple of
small locking tabs that you might have to nip off with a side cutter
before it will mate.
best,
Ike
On 2/7/2010 2:30 PM, BARAK KOREN wrote:
ike hi,
the connector i need is the the one on the end of the cable
connecting to the motherboard.
tried to find the part nr. on the digikey site but i got lost...
any help?
thanx
barak
On Feb 6, 2010, at 1:35 AM, Ike wrote:
Hi Barak. Is this in the middle or on the end of the ribbon?
I have been meaning to look up the part number but haven't had a
chance to. You should be able to get it from DigiKey. It is a 16
position, 0.100 spacing insulation displacement connector. You will
also need to know the guage of the wire in the ribbon cable (can't
remember, maybe 24 awg).
Best
Ike
Sent from my iPhone
On 2010-02-05, at 4:34 PM, BARAK KOREN <[email protected]> wrote:
hi,
i need to install a new connector on one of my ribbon cables(old
one is broken)
what is the name of this connector? where could i buy it?
thanx
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please
send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please
send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to
all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please send
an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to
all subscribers.
Vive Le Neotek!
Thanks.
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls". Authorized Warranty service for Allen& Heath, Clear-Com,
Drawmer, Soundcraft, SPL and Yamaha. Repairs and upgrades to analog audio equipment
including: AMEK, dbx, Neve, Neotek, MCI, Soundcraft and more. Ask about our RF Frequency
co-ordination services!
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
