Hi Graham,
Yes, I had been thinking about this since we spoke yesterday, and
this morning I came up with something simple and effective. Still
working on the details, and I may install a prototype in an Elite here
in town next week. I will take some pics in the next day or so. Tell me
more about your Elite...age, number of channels, number of power
supplies etc.
best,
Ike
On 6/17/2010 10:33 AM, [email protected] wrote:
Hi,
Can you send me the details and perhaps a photo.
Also think about a way we can switch the gear out of the 2bus so we can
monitor with it in and out without having to bypass everything.
This would be cool cause some equipment is not actually off or has no off
and other stuff such as Pultec even though they are "out" the signal
Is still passing thru the transformers,anyway I'm sure you know all this
business anyway
Thx
Graeme
www.mixedby.com
www.cdfaudio.com
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Ike Zimbel
Sent: Wednesday, June 16, 2010 4:36 PM
To: [email protected]
Subject: NEOTEK: Insert balancing kit specs
Hi Gang,
I got my hands on an Audio Precision Porta One the other day, which
I used to finally nail down some specs for my insert balancing kit.
These are:
Noise floor: -90.52dbm
Thd at 1khz and 10khz: 0.0015%
Thd at 100hz: 0.0016%
Frequency response, 10hz-25khz FLAT, (it's actually only 0.5db down at
56khz and about -2.5db at 120khz, something your dog will certainly
appreciate).
Input impedance:>20k ohms
So, as you can see they look pretty good on paper. What does it
sound like? A piece of wire. Why do you need one? If you have any
balanced device that you would like to be inserting across your stereo
mix, but can't because the device isn't happy looking at an un-balanced
input, this will solve that problem. Two happy customers are using a
Neve 33609 compressor and a Thermionic Culture Phoenix respectively,
since installing this insert balancing kit. Inquiries welcome!
Best,
Ike
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls". Authorized Warranty service for Allen& Heath, Clear-Com,
Drawmer, Soundcraft, SPL and Yamaha. Repairs and upgrades to analog audio equipment
including: AMEK, dbx, Neve, Neotek, MCI, Soundcraft and more. Ask about our RF Frequency
co-ordination services!
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
