Hi Jon,
I'm not very familiar with the PS-4. What is the current rating on
it's various outputs? The PS-3 is fused at 7 amps for the+/-18v rails, 1
amp for the 48v, 1 amp for the -25v and 3 amps for the 36v.
It's not a given that the BB chips will draw more than the stock chips.
Best,
Ike
On 10-10-31 11:48 AM, Jon King wrote:
Greetings Gentlemen,
I've recently gotten a wild hair to put together a set of linear power
supplies to power my Elite II. I've started down the road of recapping
/ upgrading op amps and feel like I'm going to be flirting with the
current limits of what the PSU4 can deliver (I'm on a single PSU with
a 40 channel desk). I've read multiple places that using individual
Acopian Gold Boxes is a good way to go for this and can sometimes even
improve performance. I was wondering what the amperage requirements
are for the voltages below. I want to make sure I'm leaving plenty of
headroom as I plan on upgrading the whole desk to burr-browns. Thanks
in advance for your help!
+18V Analog +
-18V Analog -
+48V Phantom +
-25V Logic B
+36V Meter +
Cheers,
Jon
--
Ike Zimbel,
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls". Authorized Warranty service for Allen& Heath, Clear-Com,
Drawmer, Soundcraft, SPL and Yamaha. Repairs and upgrades to analog audio equipment
including: AMEK, dbx, Neve, Neotek, MCI, Soundcraft and more.
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
