Thanks for all the quick responses!
But Marks pin outs are not matching mine, it may be different from
the series I originals.
Mine has male molex pins in several groups, on both PCB boards. But
not in the same pattern as the wire busses on the rest of the board.
Geoff
On Jan 14, 2011, at 11:32 AM, Jack Dean Stauss wrote:
My tech has all of my schematics for the series one at the moment.
When I get them back if you haven't found any I will scan them for
you.
Jack
Sent from my iPhone
On Jan 14, 2011, at 8:11 AM, Geoff Michael <[email protected]> wrote:
Hi All,
'm looking for the pin out for a series I master section. It was a
retrofit from sytek from the 1990's.
On the pcb it says "2 mix module"
Any help would be great!
Thanks,
Geoff Michael
The info is not available from Mike at sytek at the moment.
734 678-3684
Big Sky Recording
Ann Arbor, MI
<SeriesIMstr.JPG>
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to mailto:[email protected]
.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
