Denis,
Happy to contribute when I can. And while I’m pretty sure the III and IIIc are different, I just don’t know how different they are. Below are some scans which I believe apply to IIIc’s (and some later revisions too). http://www.catapultsound.com/public/Neotek/ There’s more where these came from, but they should help get you started. -Bill Catapult Sound From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, January 13, 2012 8:47 PM To: [email protected] Subject: Re: NEOTEK: Neotek console help Hi Wm, I am not sure either if the IIIc and the III serie are the same, So, thank you for your pront response, Denis ________________________________ From: "William Schwartz" <[email protected]> To: [email protected] Sent: Thursday, January 12, 2012 11:30:52 PM Subject: Re: NEOTEK: Neotek console help Hi Denis. We have a pretty comprehensive collection of IIIc schematics already scanned and pdf'd. Not sure if that will help for your particular console, but let me know and I can send you a link. Wm Schwartz Catapult Sound ----- Reply message ----- From: "[email protected]" <[email protected]> To: "[email protected]" <[email protected]> Subject: NEOTEK: Neotek console help Date: Thu, Jan 12, 2012 9:42 pm Hi everyone, new user of neotek here and have a problem already. Id id buy a neotek serie III and I need the schematics in order to get it fix, any help? Thanks in advance Denis Pimentel, Lynn, Ma. USA ________________________________ From: [email protected] To: [email protected] Sent: Tuesday, January 10, 2012 11:52:45 AM Subject: Re: NEOTEK: Neotek console help Thanks again guys, I pulled the effects module and aux module, and the 1st 2 lights on the supply are out. Same lights are locked on, on the main & monitor modules. I'll need the steps required to measure the +/- 18v from the back of the supply. Where do I set the meter and where do I place the probes? Dave ---- Original Message ---- From: [email protected] To: [email protected] Subject: Re: NEOTEK: Neotek console help Date: Mon, 9 Jan 2012 18:27:04 -0500 >The master section will function with just the 2-mix and monitor >modules fitted, so you could try that and see if the fault is on >either the Aux master or FX return modules. > >Ike Zimbel, >Zimbel Audio Ltd >416-720-0887 >www.zimbelaudio.com >Sent from my iPhone > >On 2012-01-09, at 5:27 PM, Jim <[email protected]> wrote: > >> Hi David, >> >> I copied this to the list so everyone else can see what's going on. >> >> Well, it may or may not. Still could be either one so: >> >> What I'd do first is to pull all the modules out of the console. >Connect the supply and see if it comes up. Then insert each module >one at a time to find the problem. ******You must power down before >inserting the modules, particularly with the logic stuff; I would >100% power down for each module though. This can take a little while, >but is the fastest approach to find what is pulling down the supply. >> >> The other possibility is the supply does have problems and can't >supply current under load. Do you have any types of meters (volts, >amps, ohms) a large resistive dummy load or the ability to make one? >I can give you tips, but if it's not something that your comfortable >with or have the gear, it really won't be of much help. If that's the >case, you may want to take Ike up on the offer to try his supply; if >it works, then you just need to have yours fixed; at least this will >break the problem down into which "half" is the issue. >> >> Good luck! >> >> Regards, Jim >> >> >> On 1/9/2012 12:59 PM, [email protected] wrote: >>> Jim, >>> I just turned on the supply (disconnected of course) and all >>> lights came on. Would this point to the modules? >>> >>> Dave >>> >>> ---- Original Message ---- >>> From: [email protected] >>> To: [email protected] >>> Subject: Neotek console help >>> Date: Mon, 09 Jan 2012 12:18:49 -0500 >>> >>>> Hi David, >>>> >>>> Well yes, we (Analog Bros) fix modules, supplies, consoles, >etc. >>>> BUT, >>>> we're in the process of moving into a new shop and house that I'm >>>> building myself. My entire shop/lab/parts/etc. are in storage and >I >>>> don't see it being set back up till spring at the earliest. >>>> >>>> I still think your problem is in the supply rather than any >modules; >>>> I'd >>>> be glad to help you figure that out using the Neotek list so >everyone >>>> >>>> else can benefit. If it does turn out you have some bad modules, >I >>>> may >>>> be able to suggest another shop to use till we get set back up. >>>> Thanks >>>> and good luck! >>>> >>>> Regards, Jim >>>> www.analogbros.com >>>> >>>> >>> >>> >>> >> ------ >> >> View the list online at: >http://www.mail-archive.com/[email protected] >> >> You can unsubscribe at anytime by sending an email to >mailto:[email protected] with "unsubscribe neotek" in the >message body. If you have any difficulties, or questions --please >send an email to mailto:[email protected]. >> >> The Neotek list is lovingly hosted by Catapult Web. Remember that >any message or reply sent to the list will be automatically forwarded >to all subscribers. >> >> Vive Le Neotek! >> >> Thanks. >> >------ > >View the list online at: >http://www.mail-archive.com/[email protected] > >You can unsubscribe at anytime by sending an email to >mailto:[email protected] with "unsubscribe neotek" in the >message body. If you have any difficulties, or questions --please >send an email to mailto:[email protected]. > >The Neotek list is lovingly hosted by Catapult Web. Remember that any >message or reply sent to the list will be automatically forwarded to >all subscribers. > >Vive Le Neotek! > >Thanks. ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks. ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
