Hello -
I notice this happens and I can't run anything more than 2-3
minutes of scannning.
[Thu Mar 20 22:10:05 2003][5053] Client requested protocol version 12.
[Thu Mar 20 22:10:05 2003][5053] successful login of eric from 10.41.92.52
[Thu Mar 20 22:11:14 2003][5053] Redirecting debugging output to /usr/local/ness
us/var/nessus/logs/nessusd.dump
[Thu Mar 20 22:11:15 2003][5053] user eric : running a detached scan
[Thu Mar 20 22:11:15 2003][5053] user eric : mailing results of a detached scan to
[EMAIL PROTECTED]
[Thu Mar 20 22:11:15 2003][5053] user eric : session will be saved as
/usr/local/nessus/var/nessus/users/epancer/sessions/20030320-221115-index
[Thu Mar 20 22:11:16 2003][5053] user eric starts a new attack. Target(s) : 1
40.192.92.1-126, with max_hosts = 2 and max_checks = 3
[Thu Mar 20 22:11:16 2003][5053] user eric : testing 10.41.92.1 [17303]
[Thu Mar 20 22:11:16 2003][5053] user eric : testing 10.41.92.2 [5976]
[Thu Mar 20 22:11:16 2003][5053] SIGSEGV occured !
bash-2.05b# /usr/local/nessus/sbin/nessusd -d
This is Nessus 2.0.1 for OpenBSD 3.2
compiled with gcc version 2.95.3 20010125 (prerelease)
Current setup :
Experimental session-saving : enabled
Experimental KB saving : enabled
Thread manager : fork
nasl : 2.0.1
libnessus : 2.0.1
SSL support : enabled
SSL is used for client / server communication
Running as euid : 0
The host is OpenBSD 3.2 with 64MB of memory and 512MB of swap.
Here's a dmesg. (I know I need more power, it's coming soon but
I wanted to do a couple scans here).
OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class)
599 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX
,FXSR,SIMD
real mem = 66682880 (65120K)
avail mem = 56299520 (54980K)
using 839 buffers containing 3436544 bytes (3356K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(fb) BIOS, date 09/27/99, BIOS32 rev. 0 @ 0xfd7a0
pcibios0 at bios0: rev. 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe0000/0x4000! 0xe4000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wi
red to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD84AA>
wd0: 16-sector PIO, LBA, 8063MB, 16383 cyl, 16 head, 63 sec, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-540E, 1.0A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00: irq 11 address 00:0
9:5b:07:8c:53
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
tx0 at pci0 dev 16 function 0 "SMC 83C170 (EPIC/100)" rev 0x06: irq 9 address 00
:e0:29:22:ea:00
qsphy0 at tx0 phy 3: QS6612 10/100 media interface, rev. 1 isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
