> Can you help me with these errors when I snmpwalk the
> Juniper MPLS MIB - the walk terminates with the
> Error: OID not increasing:
Yes - that error is correct. The agent is broken.
> I've attached the numerical OID dump/snmpwalk which works,
Ok - so have a look at the relevant section
(the subtree starting .1.3.6.1.4.1.4874.2.2.54.1.5):
.1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.2.19.80.95.84..... = enable(1)
<etc>
.1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.2.19.80.95.84..... = enable(1)
.1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.2.6.99.49.52.45.101.55 = disable(0)
.1.3.6.1.4.1.4874.2.2.54.1.5.1.1.1.2.9.101.49.52.45.99.50.45.101.55 = enable(1)
Look at the OIDs - the "disable" one is lexically *smaller* than the one
before. The agent isn't sorting them properly before returning the
results.
Since the MIB table is indexed by a (non-IMPLIED) string, it should return
shorter string index entries before longer ones - regardless of the
character values. It's only equal length index strings that are
ordered by comparison of the string values.
I suggest you complain to the vendor of the agent.
Dave
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Net-snmp-coders mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
