Hi, Xiaofeng, Is it a known issue there is a problem to launch Ipv6 and ipv4 together? I tried
snmpd -c /home/tsui/snmpd.conf udp6:161,udp:161 but it can't be up. The log says, Error opening specified endpoint "udp:161" snmpd -c /home/tsui/snmpd.conf udp:161,udp6:161 Error opening specified endpoint "udp6:161" It seems it only gets the first type of trapsport. I am using 5.0.9. Any help is appreciated. Thanks, Fong -----Original Message----- From: Ling, Xiaofeng [mailto:[EMAIL PROTECTED] Sent: Friday, May 16, 2003 2:37 AM To: Fong Tsui; [EMAIL PROTECTED] Subject: RE: IPV6 support for Linux > -----Original Message----- > From: Fong Tsui [mailto:[EMAIL PROTECTED] > Sent: Thursday, May 08, 2003 1:41 AM > To: Ling, Xiaofeng; [EMAIL PROTECTED] > Subject: RE: IPV6 support for Linux > > > From: Ling, Xiaofeng [mailto:[EMAIL PROTECTED] > > Does that mean it is not supposed to receive the packet to udpv4 > > port if I launch snmpd udp6:161? > XL>I think you can still use udpv4 and udpv6 on different port such > snmpd udp:161,udp6:162. > > So, if I can receive the packet to udpv4 port if I launch snmpd > udp6:161, there is a problem? This is the problem of stack, I don't know whether this is compliance with spec. > > Do you mean I need to launch two agents on different ports > for udp6 and > udp4? The daemon support open multiple differen port at same time. you can use command line as: snmpd upd:161,udp:162,udp6:163 > > Thank you very much for the help. > > Fong > ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Net-snmp-coders mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
