When the request from AdventNet Mib Browser configured for V3 request , then request from second Mibbrowser timed out
But from command line both were successfull >From Machine 1: =============== snmpget -v 3 -u sbssEmsUser -l authPriv -a MD5 -A sbssEmsSecretPass -x DES -X sbssEmsPassphrase localhost HNS-MSV-3GSBSS-EMS-OSS-MIB::currentAlarmID.0 RESPONSE : SUCCESS >From Machine 2: =============== snmpget -v 3 -u sbssEmsUser -l authPriv -a MD5 -A sbssEmsSecretPass -x DES -X sbssEmsPassphrase 192.168.150.6 HNS-MSV-3GSBSS-EMS-OSS-MIB::currentAlarmID.0 RESPONSE : SUCCESS Thanks ----- Original Message ----- From: Dave Shield <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Cc: [email protected] Sent: Fri, 13 Jun 2008 18:49:29 +0530 (IST) Subject: Re: Timeout on GET request from second Manager 2008/6/13 <[EMAIL PROTECTED]>: > These managers are configured for V3 request > I sent same GET request to retrieve the value of alarmID from the alarmtable > and the User was "sbssEmsUser" So you sent the exact same request from two client systems to the same SNMP agent. One worked, and one timed out. Is that correct? Can you post the *exact* commands that you used in each case? Dave ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
