I decided to drop the trap2sink and the informsink lines from my snmpd.conf and
I no longer get the V1 PDU errors.
I still have problems with the monitor section, I think...
See attached log and snmpd.conf sections.
James McKenzie
###########################################################################
#
# snmpd.conf
#
# - created by the snmpconf configuration program
#
###########################################################################
###########################################################################
# SECTION: Monitor Various Aspects of the Running Host
#
# The following check up on various aspects of a host.
# proc: Check for processes that should be running.
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.
#
# The results are reported in the prTable section of the UCD-SNMP-MIB tree
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.
proc httpd 10 2
proc arserverd 2 1
proc armonitor 2 1
proc arsvcdsp 2 1
monitor -r 30 -i -o prNames.1 -o prErrMessage.1 "Process httpd" prErrorFlag.1
!=0
monitor -r 30 -i -o prNames.2 -o prErrMessage.2 "Process ARS Server"
prErrorFlag.2 !=0
monitor -r 30 -i -o prNames.3 -o prErrMessage.3 "Process ARS Monitor"
prErrorFlag.3 !=0
monitor -r 30 -i -o prNames.4 -o prErrMessage.4 "Process ARS Approval"
prErrorFlag.4 !=0
# disk: Check for disk space usage of a partition.
# The agent can check the amount of available disk space, and make
# sure it is above a set limit.
#
# disk PATH [MIN=100000]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Can be a raw byte value or a percentage followed by the %
# symbol. Default value = 100000.
#
# The results are reported in the dskTable section of the UCD-SNMP-MIB tree
disk / 90%
disk /disk0 60%
disk /var 70%
# load: Check for unreasonable load average values.
# Watch the load average levels on the machine.
#
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.
#
# The results are reported in the laTable section of the UCD-SNMP-MIB tree
load 5 3 2
load 5 3 2
NET-SNMP version 5.3.1 restarted
/usr/local/share/snmp/snmpd.conf: line 108: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 109: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 110: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 111: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 104: Error: Already have an entry for
this process.
/usr/local/share/snmp/snmpd.conf: line 105: Error: Already have an entry for
this process.
/usr/local/share/snmp/snmpd.conf: line 106: Error: Already have an entry for
this process.
/usr/local/share/snmp/snmpd.conf: line 107: Error: Already have an entry for
this process.
/usr/local/share/snmp/snmpd.conf: line 108: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 109: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 110: Error: You must specify a default
user name using the agentSecName token
/usr/local/share/snmp/snmpd.conf: line 111: Error: You must specify a default
user name using the agentSecName token
net-snmp: 12 error(s) in config file(s)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
error on subcontainer '' insert (-1)
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
