Thanks !!! it does.
I will check it.
Best Regards
________________________________
Dan Porat
Computer and Software Engineer
Polycom Israel, Ltd.
94 Derech Em Hamoshavot, POB 3654, Petach Tikva 49130, Israel
direct: +972.3.925.1345
cell: +972.54.7722327
fax: +972.3.921.1571
Connect. Any Way You Want.
This communication (including any attachments) may contain privileged or
confidential information of Polycom and is intended for a specific
individual. If you are not the intended recipient, you should delete
this communication, including any attachments without reading or saving
them in any manner, and you are hereby notified that any disclosure,
copying, or distribution of this communication, or the taking of any
action based on it, is strictly prohibited..
-----Original Message-----
From: Joao Miguel Ferreira [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 14, 2007 4:14 PM
To: Porat, Dan
Cc: [email protected]
Subject: Re: Trap V1 and Trap V2 on the same company
On Wed, 2007-03-14 at 14:26 +0200, Porat, Dan wrote:
> Hi there!
>
> I have a few questions .
>
>
>
> 1.Has anyone faced a situation in which he had to issue both traps V1
> and V2 for different managers on the same time ?
For snmmpd this is quite indiferent. You can configure as many trapsink,
trap2sink and informsink as tou wish. Traps will go to all of them.
Check this manual: man snmpd.conf. Look for section: "SETTING UP TRAP
AND/OR INFORM DESTINATIONS".
>
> 2.Is the an abstraction level which enables me to issue a GENERIC
> trap , and according to configuration , it will send trap V1 to
> certain IPs , and trap V2 to different IPs.
I think (almost 100% sure) that snmpd will send the correct versions of
the traps to all the definied trapsinks and the trap will be sent with
the correct version.
Even if you use the API (ex: send_v2trap), dispite the name V2, traps
will be correctly sent to all *sink in the snmpd.conf file.
read this manual: man send_v2trap, or man send_easy_trap (it is really
the same man)
Does this answer your question ?
Cheers
jmf
>
> 3.If there is such an option , how do I configure it .
>
>
>
> Thanks
>
>
>
<
>
> Best Regards
>
>
>
> ________________________________
>
> Dan Porat
>
> Computer and Software Engineer
>
> Polycom Israel, Ltd.
>
> 94 Derech Em Hamoshavot, POB 3654, Petach Tikva 49130, Israel
>
> direct: +972.3.925.1345
>
> cell: +972.54.7722327
>
> fax: +972.3.921.1571
>
> Connect. Any Way You Want.
>
> This communication (including any attachments) may contain privileged
> or confidential information of Polycom and is intended for a specific
> individual. If you are not the intended recipient, you should delete
> this communication, including any attachments without reading or
> saving them in any manner, and you are hereby notified that any
> disclosure, copying, or distribution of this communication, or the
> taking of any action based on it, is strictly prohibited..
>
<
>
>
>
------------------------------------------------------------------------
-
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to
share your
> opinions on IT & business topics through brief surveys-and earn cash
>
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
> _______________________________________________ Net-snmp-users mailing
list [email protected] Please see the following page
to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
