Try adding Dsum parameter to snmptrapd to get some extra debug information (snmptrapd -f -Le Dsum)
I have not managed to get the snmptrap command to work with snmpV3 users but the snmpinform command did (I think snmpinform is the equivalent to using snmptrap Ci ...) I notice you have specified an engine id of 0x0102030405 which I expect is taken from one of the examples, I assume this is the same engine id used by the trap sink? If not I expect it probably should be. I have been using one of the SNMP examples, below is information from my configuration and script files if it helps. Check you have the authuser entry in your configuration file. The example I have been using including MIB files can be found here... http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap.html Darryl A trap handler (/home/myuser/trap.sh) ------------------------------- #!/bin/sh read host read ip vars= while read oid val do if [ "$vars" = "" ] then vars="$oid = $val" else vars="$vars, $oid = $val" fi done echo trap: $1 $host $ip $vars Trapd configuration (snmptrapd.conf) ------------------------------------ authuser log,execute,net testuser authCommunity log,execute,net public trapcommunity public # the generic traps traphandle SNMPv2-MIB::coldStart /home/myuser/trap.sh cold traphandle SNMPv2-MIB::warmStart /home/myuser /trap.sh warm traphandle IF-MIB::linkDown /home/myuser /trap.sh down traphandle IF-MIB::linkUp /home/myuser /trap.sh up traphandle SNMPv2-MIB::authenticationFailure /home/myuser /trap.sh auth # this one is deprecated traphandle .1.3.6.1.6.3.1.1.5.6 /home/support/trap.sh egp-neighbor-loss # enterprise specific traps traphandle TRAP-TEST-MIB::demo-trap /home/myuser /trap.sh demo-trap traphandle NOTIFICATION-TEST-MIB::demo-notif /home/ myuser /trap.sh demo-notif All of the following commands worked for me... snmptrap -v 1 -c public 192.168.28.22 TRAP-TEST-MIB::demotraps 192.168.144.229 6 17 "" SNMPv2-MIB::sysLocation.0 s "Just here" snmptrap -v 2c -c public 192.168.28.22 "" NOTIFICATION-TEST-MIB::demo-notif SNMPv2-MIB::sysLocation.0 s "just here" snmpinform -v 3 -u usera -a MD5 -A mypassword -l authNoPriv 192.168.28.22 coldStart.0 ________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Reza Salehi Sent: 31 July 2007 20:52 To: SNMP FORUM Subject: problem in receiving traps in SNMP-V3 Hi All, I am able to send and receive Trap in V2 mode but in V3 I can send trap but I am not able to see them using snmptrapd.I can see the packets coming using -d switch but not able to see the content of the message. This is what I am doing. At the sender : snmptrap -e 0x0102030405 -v 3 -u Reza -a MD5 -A 12345678 -l authNoPriv 192.168.0.204 42 coldStart.0 and in reciver runinng snmptrapd -Le -f -d and in /var/net-snmp/snmptrapd.conf createUser -e 0x0102030405 Reza MD5 12345678 DES 9876543210 I appreciate it if you could help me out. Regards, Reza ________________________________________ Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
