Dear Thomas, I am very thanks your information.
But, I had a problem in ./configure processing. below are my cross-compile step. Step 1. Download "net-snmp-5.4.1.tar.gz" on Net-SNMP web side. Step 2. Tar -xzvf net-snmp-5.4.1.tar.gz in Fedora Core 8. Step 3. cross-compile Net-SNMP via command "./configure CC="powerpc-linux-gcc" AR="powerpc-linux-ar" LD="powerpc-linux-ld" RANLIB="powerpc-linux-ranlib" --host=powerpc-linux --with-endianness=big --prefix=/usr --with-install-prefix="/tmp/image" --without-perl-modules " Step 4. make, and then occurred Error. The error message as below: Error Message: ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [EMAIL PROTECTED] net-snmp-5.4.1]# make making all in /C_script/net-snmp-5.4.1/snmplib make[1]: Entering directory `/C_script/net-snmp-5.4.1/snmplib' make[1]: Leaving directory `/C_script/net-snmp-5.4.1/snmplib' making all in /C_script/net-snmp-5.4.1/agent make[1]: Entering directory `/C_script/net-snmp-5.4.1/agent' making all in /C_script/net-snmp-5.4.1/agent/helpers make[2]: Entering directory `/C_script/net-snmp-5.4.1/agent/helpers' make[2]: Leaving directory `/C_script/net-snmp-5.4.1/agent/helpers' making all in /C_script/net-snmp-5.4.1/agent/mibgroup make[2]: Entering directory `/C_script/net-snmp-5.4.1/agent/mibgroup' make[2]: Leaving directory `/C_script/net-snmp-5.4.1/agent/mibgroup' /bin/sh ../libtool --mode=link powerpc-linux-gcc -g -O2 -Ulinux -Dlinux=linux -o snmpd nmpd.lo -L../snmplib/.libs -L../snmplib -L./.libs -L./helpers/.libs -L./helpers libnetsnmpagent.la helpers/libnetsnmphelpers.la libnetsnmpmibs.la ../snmplib/libnetsnmp.la -Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -L/usr/local/lib /usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -lperl -lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc powerpc-linux-gcc -g -O2 -Ulinux -Dlinux=linux -o .libs/snmpd .libs/snmpd.o -Wl,-E -Wl,-rpath -Wl,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -L/C_script/net-snmp-5.4.1/agent/.libs -L/C_script/net-snmp-5.4.1/agent/helpers/.libs -L/C_script/net-snmp-5.4.1/snmplib/.libs -L/C_script/net-snmp-5.4.1/snmplib -L/C_script/net-snmp-5.4.1/agent/helpers ./.libs/libnetsnmpagent.so helpers/.libs/libnetsnmphelpers.so ./.libs/libnetsnmpmibs.so /C_script/net-snmp-5.4.1/agent/helpers/.libs/libnetsnmphelpers.so /C_script/net-snmp-5.4.1/agent/.libs/libnetsnmpagent.so /C_script/net-snmp-5.4.1/snmplib/.libs/libnetsnmp.so ../snmplib/.libs/libnetsnmp.so -L/usr/local/lib /usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -lperl -lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc /opt/ppc/gcc-3.4.3-glibc-2.3.3/bin/../lib/gcc/powerpc-linux/3.4.3/../../../../powerpc-linux/bin/ld: skipping incompatible /usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE/libperl.so when searching for -lperl /opt/ppc/gcc-3.4.3-glibc-2.3.3/bin/../lib/gcc/powerpc-linux/3.4.3/../../../../powerpc-linux/bin/ld: cannot find -lperl collect2: ld returned 1 exit status make[1]: *** [snmpd] Error 1 make[1]: Leaving directory `/C_script/net-snmp-5.4.1/agent' make: *** [subdirs] Error 1 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- I don't need perl function to run SNMP and had already add the "--without-perl-modules" parameter with ./configure. but, the "../powerpc-linux/bin/ld: cannot find -lperl" error still occurred. Could you help me to solve it?? Thank a lots! Best Regards Sam Lin Software Engineer R&D Center Development . E-mail: [EMAIL PROTECTED] Tel. +886 2 2698-2334 Ext.506 Fax. +886 2 2698-2380 EverFocus Electronics Corp. 10F-6, No.79, Sec. 1, Hsin Tai Wu Road., Hsichih, Taipei Hsien 221 Taiwan, R.O.C. www.everfocus.com.tw ----- Original Message ----- From: "Thomas Anders" <[EMAIL PROTECTED]> To: "sam_lin ??? 506" <[EMAIL PROTECTED]> Cc: <net-snmp-users@lists.sourceforge.net> Sent: Wednesday, August 20, 2008 7:13 AM Subject: Re: About Net-SNMP for PowerPC install > sam_lin wrote: >> Actuality, I need install the Net-SNMP on Embedded Linux PowerPC. So, >> could you have any solution or SOP to do it?? > > You need to be familiar with cross-compiling in general. > http://www.freesnmp.com/net-snmp/faqs/#cross will give some additional > hints. > > > +Thomas > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes > Grand prize is a trip for two to an Open Source event anywhere in the > world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Net-snmp-users mailing list > Net-snmp-users@lists.sourceforge.net > Please see the following page to unsubscribe or change other options: > https://lists.sourceforge.net/lists/listinfo/net-snmp-users ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
