Yes. You can see clearly the definition of sysUpTime in the snmpwalk output. You have no problems with MIBs. In fact using either MIBs for sysUpTime (RFC or DISMAN) will get you the same result, because they are getting it from the same place:

mib-2->system->sysUpTime->sysUptimeInstance

as you can see from the walk.

I am sorry for keeping you this late. This is my configuration (snmpd.conf) with passwords crossed out. Replace all xxx with your passwords. It works fine for me. Please back up yours, take mein and restart snmpd and test again.

BR,
Nikos

----- Original Message ----- From: "Tanya Brudner" <[email protected]> To: "Nikos Balkanas" <[email protected]>; <[email protected]>
Sent: Thursday, January 01, 2009 11:58 PM
Subject: RE: sysUpTime returns an error


Nikos,

The file - renamed.
The snmpd - restarted.
The snmpget returns the exact same error as before
("DISMAN-EVENT-MIB::sysUpTimeInstance = No such Object available on this
agent at this OID").
(If using the specific RFC1213-MIB reference, I get the same error text,
just for the correct mib ("RFC1213-MIB::sysUpTime.0..")

The snmptranslate worked properly this time - please see the attached
file.


Thanks again, very very much!

-Tanya


-----Original Message-----
From: Nikos Balkanas [mailto:[email protected]]
Sent: Thursday, January 01, 2009 23:29
To: Tanya Brudner; [email protected]
Subject: Re: sysUpTime returns an error

Looks like your sysUptime is correctly set.
DISMAN-EVENT-MIB seems to have some issue.

Please:
mv /usr/local/share/snmp/mibs/DISMAN-EVENT-MIB.txt.1
/usr/local/share/snmp/mibs/DISMAN-EVENT-MIB.txt

restart snmpd.

snmpget 127.0.0.1 sysUpTime.0

If this doesn't work, one last output from:

snmptranslate -M+. -m DISMAN-EVENT-MIB -Tp -IR mib-2

Thanx,
Nikos
----- Original Message ----- From: "Tanya Brudner" <[email protected]>
To: "Nikos Balkanas" <[email protected]>;
<[email protected]>
Sent: Thursday, January 01, 2009 10:55 PM
Subject: RE: sysUpTime returns an error


Thanks,

The output you requested:

+-- -R-- TimeTicks sysUpTime(3)

(keeping my fingers crossed)
-Tanya



-----Original Message-----
From: Nikos Balkanas [mailto:[email protected]]
Sent: Thursday, January 01, 2009 22:14
To: Tanya Brudner; [email protected]
Subject: Re: sysUpTime returns an error

Thanx. I think I see something. If you can please mail me also (1 line
output):

snmptranslate -M+. -m SNMPv2-MIB -Tp -IR sysUpTime

BR,
Nikos
----- Original Message ----- From: "Tanya Brudner" <[email protected]>
To: "Nikos Balkanas" <[email protected]>;
<[email protected]>
Sent: Thursday, January 01, 2009 9:56 PM
Subject: RE: sysUpTime returns an error


Hi Nikos,

In the attached file are the snmpwalk result (I'm not sure what to make
of it, really :) ), and the 'ls' output.

Thanks again,

-Tanya


-----Original Message-----
From: Nikos Balkanas [mailto:[email protected]]
Sent: Thursday, January 01, 2009 21:29
To: Tanya Brudner; [email protected]
Subject: Re: sysUpTime returns an error

Please run:

ls -la /usr/local/share/snmp/mibs/DISMAN*

and also:

snmpwalk 127.0.0.1 dismanEventMIB

And send output.

Thanx,
Nikos
----- Original Message ----- From: "Tanya Brudner" <[email protected]>
To: <[email protected]>
Sent: Thursday, January 01, 2009 8:56 PM
Subject: RE: sysUpTime returns an error


Hi,

Thanks again but I am still a bit confused:

My access rights (as defined in the /etc/snmp/snmpd.conf) (almost from
the sample file) are defined as following:

Com2sec my-sec-ro default public
Com2sec my-sec-rw default private

Group my-ro-group v1 my-sec-ro
Group my-rw-group v1 my-sec-rw
Group my-ro-group usm my-sec-ro
Group my-rw-group usm my-sec-rw

View all included .1

access my-rw-group "" v1  noauth exact all all none
access my-ro-group "" v1  noauth exact all none none
access my-rw-group "" usm  noauth exact all all none
access my-ro-group "" usm  noauth exact all none none

rwuser myuser authPriv (the user is created directly by putting the
createUser directive in the /var/lib/... snmpd.conf file).

Perhaps there is anything wrong here, or you can advice on something
else I could try...

Thanks again,

-Tanya

-----Original Message-----
From: Wes Hardaker [mailto:[email protected]]
Sent: Wednesday, December 31, 2008 18:47
To: Tanya Brudner
Cc: [email protected]
Subject: Re: sysUpTime returns an error

On Tue, 30 Dec 2008 22:23:01 +0200, "Tanya Brudner"
<[email protected]> said:

TB> I have a problem with Get-request on a single mib: SysUpTime.

TB> On a snmpget -v3 ..... system.sysUpTime.0, it returns
TB> ""DISMAN-EVENT-MIB::sysUpTimeInstance = No such Object available
on
this
TB> agent at this OID"

It looks like you don't have access rights to that object.  Check your
access control settings, or check that the agent was compiled to
include
the system group (it should have been unless you're doing something
odd).

The DISMAN-EVENT-MIB part is actually just misleading.  It is the
right
object.  The DISMAN-EVENT-MIB defines the scalar instance as something
special for it's own purposes.  Just ignore that part in your error
comment as it's not relevant to your problem.
--
Wes Hardaker
Sparta, Inc.


------------------------------------------------------------------------
------
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users


Attachment: snmpd.conf
Description: Binary data

------------------------------------------------------------------------------
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

Reply via email to