> > > > I directly updated the MIB so that the MIB under > > /usr/local/share/snmp/mibs is now the newer version (same > name). I did > > have MIBS set to all. > > Hmmm... that should work. Did you perhaps change the > name of an imported object? If so, you must change the name > where it is imported as well. There is an object being > imported from CISCO-DMP-MIB (yours?) into UCD-DEMO-MIB - is > that perhaps an old test that you never cleaned up? > > Thanks for your help. Found that I had another MIB under /usr/local/share/snmp/mibs with the same name but a different extension (CISCO-DMP-MIB.txt_old_type) which I had used some time back and forgoten about it. Somehow that was causing the problem. Not sure why the problem didn't surface earlier (or maybe I didn't notice!) This old file had the same object name but the type of the object was different. Once I changed the name in the working file (but left the old one as is), it started created problems.
Anyway, I deleted the old file and it works now! Regards, Mitul ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
