Thanks Dave!!!
I've tried that without success.... I defined two trapsess and the agent do not
run properly and do not answer to the requests.
I do not know why. But since I know it's possible and that should work, I will
try to do some trace in order to understand what's the problem.
Thanks again,
Ângela
-----Original Message-----
From: dave.shi...@googlemail.com on behalf of Dave Shield
Sent: Sat 1/31/2009 10:50 AM
To: Angela Lazaro
Cc: net-snmp-users@lists.sourceforge.net; net-snmp-cod...@lists.sourceforge.net
Subject: Re: Sending Traps for different destinations at the same time
2009/1/30 Angela Lazaro <angela.laz...@edisoft.pt>:
> ... if I want to use only SNMPv3, how can I send a multi destination trap?
Use two "trapsess" directives.
Each such line (be it trapsess, trapsink, etc) will configure a
separate trap destination. If you have 28 such lines in your
config file, you will end up sending 28 copies of each trap!
Dave
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users