Hi Max,
I don't think the createUser -e 0x0102030405....is doing anything. I
think the FC 4 box has an older version of snmptrapd that doesn't
require the level of configuration you are looking at with the Fedora 10
box.
Actually, the createUser token should be placed into the
/var/net-snmp/snmptrapd.conf file. Sometimes you have to restart the
snmptrapd utility or kill -SIGHUP the process to get it to reload the
/var/net-snmp/snmptrapd.conf file.
One work around would be to place the following token in your
snmptrapd.conf file:
disableAuthorization yes
...but you really should be using authorization in most environments
other than a development situation ;-)
Regards,
Mark
http://EllisonSoftware.com
On 03/24/2009 06:58 PM, Max Malzkuhn wrote:
> That's what's really strange. My other trap receiver (Fedora 4) has "never
> heard" of this new piece of hardware I am trying to get to send traps to the
> Fedora 10 box but it receives traps from it just fine. I looked to see if I
> had Authentication turned off on the FC4 box but didn't find anything to
> indicate that. The FC4 box that can receive the traps just has the
> following:
>
> /etc/snmp/snmptrapd.conf
> createUser -e 0x0102030405 edgewater MD5 edgewater DES edgewater
>
> /var/net-snmp/snmptrapd.conf
> usmUser 1 3 0x80001f88800dcb872c4884da43 0x65646765776174657200
> 0x65646765776174657200 NULL .1.3.6.1.6.3.10.1.1.2
> 0x56c8a3b49a156b3be16db94a3b3c7aa0 .1.3.6.1.6.3.10.1.2.2
> 0x56c8a3b49a156b3be16db94a3b3c7aa0 0x00
> usmUser 1 3 0x80001f88800dcb872c4884da43 0x65646765776174657200
> 0x65646765776174657200 NULL .1.3.6.1.6.3.10.1.1.2
> 0x56c8a3b49a156b3be16db94a3b3c7aa0 .1.3.6.1.6.3.10.1.2.2
> 0x56c8a3b49a156b3be16db94a3b3c7aa0 0x00
> engineBoots 15610
> oldEngineID 0x80001f88800dcb872c4884da43
>
>
> So I got the engineID from the system sending the traps and put it into
> /etc/snmptrapd.conf
>
> I re-ran snmptrapd with -D and didn't see any error messages, but when I run
> it with the following, I get nothing:
>
> Snmptrapd -f -Le -F "%02.2h:%02.2j TRAP%w.%q from %A %W %P\n%V\n%v\n"
>
> Very strange.
>
> Max
>
>
> -----Original Message-----
> From: Mark Ellison [mailto:m...@ellisonsoftware.com]
> Sent: Tuesday, March 24, 2009 3:11 PM
> To: mmalzk...@edgewaternetworks.com
> Cc: net-snmp-users@lists.sourceforge.net
> Subject: Re: Version 5.4.2.1 snmp v3 traps with snmptrapd
>
>
> On 03/24/2009 06:07 PM, Mark Ellison wrote:
>
>> On 03/24/2009 05:55 PM, Max Malzkuhn wrote:
>>
>>> Hi Mark. How do I figure out which is the right engineID? The
>>> 0102030405
>>> is not the right one but it is what is in my receiver's config that
>>> works.
>>> Are you saying I should use the engineID
>>> "0x80001f8880a6aba16d9a0ec949" in
>>> my createUser?
>>>
>>>
>> Did you try doing an snmpget <options> <fedora10system>
>> SnmpEngineID.0?
>>
> Above target should be your 'source system' for sending the trap, not
> the fedora 10 system that receives the trap...sorry...I am multiplexing ;-)
>
>> Each 'SNMP Engine' is supposed to have a unique SnmpEngineID value.
>> Please see RFC 3411 for additional information.
>>
>> Regards,
>>
>> Mark
>> http://EllisonSoftware.com/Services/
>>
>>
>
>
>
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
