Hi
i use net-snmp to create VLAN and to Change a Port from One VLAN to Another
VLAN ,in cisco Catalyst 2950 i use this document:
http://www.cisco.com/en/US/tech...<http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801c6035.shtml>
i created vlan 6 and i changed port 8 to this vlan :
#sh vlan :
....
6 vlan6 active Fa0/8
but when i reboot my switch the config was changed:
#sh vlan :
........
6 vlan6 active
the port 8 is in vlan1 (default vlan)
how can I solve this problem ?
can i execute the command " copy running-config startup-config" with
snmp ?
help !
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
