Hi ALL,
I am Revathy from India. I am having a problem in snmpv3 walk.
Steps to repro the problem.
1. I created a user, view.(createUser and createView)
2. I associated a view with a group.(createAccess)
3. In turn I associated a securityname with group (createSec2Group)
4. I have done snmpv3 walk for that view using the v3 user created. It works
fine
5. Later on I created SNMPv1 trap. For eg I have written the following line
in /usr/local/share/snmp/snmpd.conf
trapsink <IP-address>
1. I reconfigured "snmpd" using "SIGHUP" signal.
2. I have done the same snmpv3 query as I have done in step 4. Now snmpv3
walk is not working as the snmpv3 view, group and sec2group entries are deleted
automatically. Only snmpv3 user entry is there in the usmtable others are
deleted. Hence query fails for that view.
Please give the suggestion where I am going wrong. I am creating v3 users,
view, group and access using snmpvacm and snmpusm utilities. Is there any link
between snmpv1/v2 and v3 configurations? Why configuring v1|v2 traps makes
snmpv3 walk failure? Please respond as soon as possible.
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended
for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates.
Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the
opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of
this message without the prior written consent of the author of this e-mail is
strictly prohibited. If you have
received this email in error please delete it and notify the sender
immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
